搜索产品
搜索文章
Advantech ICR-4453W1S is a ICR-4400, EUROPE, 5× ETH, 1× RS232, 1× RS485, CAN, PoE PSE+, WIFI, SFP, USB, SD, No ACC
如需帮助,请联系我们
免费电话：400-880-8951
公司邮箱：advavee@outlook.com
咨询客服：一站式采购
批量采购定制咨询，请发送您的需求，我们将立即回复。
Order Codes
| Model no. - Order Codes | REGION | 5× Gigabit Ethernet | 4× PoE PSE+ | SFP cage (up to 10 Gbps) | RS232 RS485 CAN BUSI/O | GNSS | 4× ANT | 2× SIM | WiFi 802ac | Operating Temperature | |
| ICR-4453 | EMEA | ü | ü | ü | ü | ü | ü | NONE | -40 to +75 °C | ||
| ICR-4453S | EMEA | ü | ü | ü | ü | ü | ü | ü | NONE | -40 to +75 °C | |
| ICR-4453W | EMEA | ü | ü | ü | ü | ü | ü | 3×3 MIMO | -40 to +75 °C | ||
| ICR-4453WS | EMEA | ü | ü | ü | ü | ü | ü | ü | 3×3 MIMO | -40 to +75 °C | |
| ICR-4453W1 | EMEA | ü | ü | ü | ü | ü | ü | 3×3 MIMO | -40 to +60 °C | ||
| ICR-4453W1S | EMEA | ü | ü | ü | ü | ü | ü | ü | 3×3 MIMO | -40 to +60 °C | |
Specifications
| System | |
| CPU | Quad-Core ARM Cortex-A72, 1200 MHz |
| Memory | RAM - 1024 MB eMMC - 4096 MB(838 MB for Router Apps, 512 MB for customer data) |
| Watchdog | HW Watchdog |
| RTC | Battery backup RTC |
| TPM | Trusted Platform Module (TPM) 2.0 |
| Interfaces | |
| Ethernet | 5× Ethernet (4+1), RJ45, 10/100/1000 Mbps*Optional 4× PoE PSE,IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE)(PoE use is limited – see the ICR-4461 user manual) |
| SFP Cage | 1× SFP cage (up to 10 Gbps) |
| Serial Lines | 1× RS232 (Tx, Rx, GND, RTS, CTS)1× RS485 (A(-), B(+), GND)1× CAN (CAN_H, CAN_L)(14-pin terminal block) |
| I / O | 2× Digital Input (3 mA consumption)2× Digital Output (Open Drain, 48 V / 500 mA) (14-pin terminal block) |
| USB | 1× USB 2.0 Host Connector |
| MicroSD Card | 1× Micro SD Card Slot |
| Reset Button | Reboot / Factory reset |
| LED Indicators | System, 3-level signal strength, Data activity, SIM1/SIM2 status, 3G/4G/5G technology, 2× Input, 2× Output, User, ETH |
| GNSS | |
| Antenna | 1× SMA connector, active (300 mA) |
| Systems | GPS, GLONASS, BeiDou, Galileo, QZSS, SBAS |
| Protocol | NMEA |
| Ac Time-to-First-Fix | Cold 25 s, Warm 10 s |
| Environmental | |
| Power Supply | 9 – 48 V DC (2-pin terminal block) |
| Consumption | Without WiFiIdle 4.6 W / Average 6.1 W / Peak 14 WWith WiFiIdle 5.9 W / Average 8.1 W / Peak 16 WPoE PSE without WiFiIdle 4.9 W / Average 6.1 W / Peak 128 WPoE PSE with WiFiIdle 6.2 W / Average 8.1 W / Peak 130 W |
| Sleep Mode | Yes, 24 mW, 310 mW for PoE PSE |
| Operating Temperature | -40 to +75 °C-40 to +60 °C - ICR-4453W1, ICR-4453W1S |
| Storage Temperature | -40 to +85 °C |
| Humidity | 0 to 95 % |
| IP Cover | IP30 |
| Physical Characteristics | |
| Dimensions | 47 × 110 × 195 mm |
| Enclosure | Robust Metal Case, Grounding Screw |
| Mounting | Wall Mounting, DIN Rail (optional) |
| Weight | 1275 g |
| WiFi - optional (ICR-4453W, ICR-4453WS, ICR-4453W1, ICR-4453W1S) | |
| Antenna | 3× R-SMA connectors, 3×3 MIMO |
| Standards | IEEE802.11 ac/a/b/g/n 2.4 GHz / 5 GHz |
| Data Rate | Up to 600 Mbps @ 2.4 GHz Up to 1300 Mbps @ 5 GHz |
| Security | WEP, WPA, WPA2, WPA3, 802.1X |
| Modes | Access Point (unlimited clients), Station, Multirole STA & AP |
| Cellular Interface | |
| SIM Slots | 2× SIM (Mini SIMs – 2FF)1× eSIM Ready |
| Antennas | 4× SMA connector |
| 5G NR frequency bands | 5G NSA Bands: n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48/n66/n71/n77/n78/n79 Transfer rate: 2.5 Gbps (DL), 650 Mbps (UL)5G SA Bands: n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48/n66/n71/n77/n78/n79 Transfer rate: 2.1 Gbps (DL), 450 Mbps (UL) |
| LTE Parameters | Supported frequency bands: B1/B2/B3/B4(B66)/B5(B18/B19/B26)/B7/B8/B12(B17)/B13/B14/B20/B25/B26/B28/B29/B30/B32/B34/B38/B39/ B40/B41/B42/B43/B46(LAA)/B48/B71Transfer rate: 1 Gbps (DL), 211 Mbps (UL) |
| HSPA+/UMTS Parameters | Supported frequency bands: B1/B2/B3/B4/B5/B6/B8/B19 Transfer rate: 42 Mbps (DL), 5.76 Mbps (UL) |
| Software | |
| Operating System | ICR-OS (Linux based) |
| SW Customization | Router App |
| Application Development | Open Linux, *Python, BASH, C/C++, *Node-RED, *Docker |
| Networking Features and Protocols | DHCP, NAT/PAT, SSH, VRRP, PPPoE, SNMP, SMTP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, NTP Client/Server, *Routing protocols RIP, BGP, OSPF, IS-IS, NHRP, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack |
| Industrial Protocols and IoT | *Modbus RTU/TCP gateway, *IEC 60870-5-101 to 104 gateway, *DF1, *DNP3, *MQTT, *LWM2M |
| Security | HTTPS, SSH, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering) VPN Tunneling – WireGuard, OpenVPN, *EasyVPN, IPsec with IKEv1 and IKEv2, GRE, L2TP, PPTP Authentication – RADIUS, TACACS+, 2FA, *SCEPEncryption – DES, 3DES, AES, RSA, MD5, SHA |
| Firmware Management | Automatic firmware updates – server, locally via LAN or remotely via WAN Over-the-Air cellular module firmware updates |
| Diagnostic/Log | Status – Signal Strength, Data Usage, Detailed Long Term StatisticsOne CLICK report – Current Configuration, Factory Identification, Routing Table Log – System Log, Reboot Log, Kernel LogRemote Diagnostics (via SSH) |
| Event Engine | StartUp script & Up/Down script (Own rules based on Digital Inputs, Network Parameters, Data Usage, Timer, Power, Device Temperature) Report Types: SMS, email, SNMP Trap |
| Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup & Restore configuration |
| Advanced Software Tools | WebAccess/DMP – Remote Device Provisioning, Monitoring & Management Platform WebAccess/VPN – Advanced Secure Networking Platform |
*Functionality is available with installed Router App
| Standards & Regulations | |
| Radio | EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 303 413, EN 301 893, EN 300 328 |
| EMC | EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 301 489-52, EN 610000-6-2, EN 55032, EN 61000-4-2, EN 61000-4-3,EN 61000-4-4, EN 61000-4-5, EN 61000-4-6 |
| Safety | EN 62 368-1, IEEE 802.3 |
| Transportation | **E-mark |
| National | CE, UKCA |
| Mechanical | EN 60068-2-27, EN 60068-2-64, EN 60529 |
| Climatic | EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-30 |
| Environmental | REACH, RoHS3, WEEE |
| Cellular Module Approvals* | Regulatory: GCF, CE, FCC, PTCRB, IC, JATE/TELEC, RCMCarrier: Deutsche Telekom, AT&T, FirstNet, T-Mobile, Verizon (planned), Telstra |
*- Approvals are valid for the integrated cellular module inside the router only. Cellular module approvals are not always applicable for the whole router – see “Standards and Regulations” chart for complete router approvals available. **- Models having ICR-4453W1, ICR-4453W1S order codes have no E8 certification.
Accessories
| Part Number | Description | Included in the package |
| BB-CON-WR2 | 2-pin PWR connector | ü |
| CON-ICR44-14 | 14-pin Serial / IO connector | |
| Wall mount kit | ||
| BB-DIN-ICR32 | DIN clip (2 pcs are necessary for the mounting) | Optional |
| RPS-ICR4-WR2-M | Wall mount Power supply, 12 V/1.5 A, EU, UK, US, AUS plugs | |
| RPS-ICR4-WR2-PSE | **Desktop Power supply POE PSE, 48 V / 1.35 A, (without Power Cord) | |
| BB-PWRCORD-AUS | AUS Power Cord (for RPS-ICR4-WR2-PSE) | |
| BB-PWRCORD-EU | EU Power Cord (for RPS-ICR4-WR2-PSE) | |
| BB-PWRCORD-UK | UK Power Cord (for RPS-ICR4-WR2-PSE) | |
| BB-PWRCORD-US | US Power Cord (for RPS-ICR4-WR2-PSE) | |
| BB-KD-ETH | Ethernet cross cable, 1.5 m, Shielded | |
| OPT1-ANT-WFT-06 | Antenna Wi-Fi, Terminal (3 pcs are recommended for full 3×3 MIMO performance) | |
| OPT1-ANT-GNS-20 | Antenna GNSS, magnetic | |
| ANT-LTE5G-025 | Antenna 5G/LTE, Terminal (4 pcs are recommended for full cellular 5G performance) | |
| BB-2J7B83BC-150 | Antenna 4in1 5G/LTE MIMO, Screw mount, 4× cable 1.5 m | |
| BB-2J7184BGFC-150 | Antenna 5in1 5G/LTE MIMO, GNSS, Screw mount, 5× cable 1.5m |
ICR-4453W1S我们网站向用户提供的cookie来增强您的用户体验，个性化内容，并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie，请点击“接受所有cookie”。
或者，点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息，并选择您希望我们使用的cookie类型。
