Order Codes
Model no. - Order Codes |
Region |
2× Ethernet |
RS232 RS485 |
I/O |
LTE ANT |
2× SIM |
LAST-GASP |
|
ICR-3211B | Global* | ü | ü | ü | ü | ü | ü |
Specifications
System | |
CPU | Cortex-A8, 1000 MHz |
Memory |
RAM – 512 MB eMMC – 4096 MB
(838 MB for Router Apps, 512 MB for customer data) |
Watchdog | HW Watchdog |
RTC | Battery backup RTC |
Interfaces | |
Ethernet | 2× Ethernet, RJ45, 10/100 Mbps, Isolation 1.5 kV |
Serial Lines |
1× RS232 (Tx, Rx, RTS, CTS, GND)
1× RS485 (A(-), B(+), GND) (10-pin terminal block) |
I / O |
1× Digital Input
1× Digital Output (10-pin terminal block) |
Reset Button | Reboot / Factory reset |
LED Indicators | System, 3-level signal strength, Data activity, SIM1/SIM2 status, 2G/4G technology, User, ETH |
Environmental | |
Power Supply | 9 – 36 V DC (2-pin terminal block) |
Consuption | Idle 2.5 W / Average 4 W / Peak 11 W |
Sleep Mode | Yes, 100 mW |
Operating Temperature | -40 to +75 °C |
Storage Temperature | -40 to +85 °C |
Humidity | 5 to 95 % |
IP Cover | IP30 |
Physical Characteristics | |
Dimensions | 31.2 × 94 × 129 mm |
Enclosure | Metal Case, Grounding Screw |
Mounting | Wall Mount kit, DIN Rail |
Weight | ICR-3211B, ICR-3211B-DMP - 457g |
Cellular Interface | |
SIM Slots | 2× SIM (Mini SIM – 2FF) with cover, *1× Chip SIM (MFF2) |
Antennas | 1× SMA connector |
LTE Parameters |
Cat M1 (LTE-M) / NB-IoT (cat. NB1)
FDD frequencies: B1 (2100 MHz) B2 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz), B5 (850 MHz), B8 (900 MHz), B12, B13 (700 MHz), B18, B19 (850 MHz), B20 (800 MHz), B26 (850 MHz), B28 (700 MHz) TDD frequencies: B39 (1900 MHz) Cat M1 only Transfer rate Cat M1: 375 Kbps (DL), 375 Kbps (UL) Transfer rate Cat NB1: 32 Kbps (DL), 70 Kbps (UL) |
EDGE/GPRS Parameters | Supported frequencies: B2 (1900 MHz), B3 (1800 MHz), B5 (850 MHz), B8 (900 MHz) Transfer rate: 296 Kbps (DL) / 236,8 Kbps (UL) |
* Project-based customization
Standards & Regulations | |
Radio | PTCRB, EN 301 511, EN 301 908-1, EN 301 908-13, EN 303 413 |
EMC | EN 301 489-1, EN 301 489-19, EN 301 489-52, EN 61000-6-2, EN 61000-6-4, FCC 15.107Class B, FCC 15.109 Class B, IC |
Safety | EN 60 950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 + AC:2011 |
Mechanical | EN 60068-2-27, EN 60068-2-64, EN 60068-2-64, MIL-STD-810G, SAE J1455 |
Climatic | EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-78, MIL-STD-810G, SAE J1455 |
Transportation | EN 45545-2 |
Railway | EN 50155 compliant |
Carrier Approval | Verizon, AT&T |
National | FCC, IC, CE, UKCA |
Environmental | REACH, RoHS3 and WEEE compliant |
Cellular Module Approvals* |
Regulatory: GCF, CE, FCC, PTCRB, IC, Anatel, IFETEL, CCC, KC, NCC, JATE/TELEC, RCM, NBTC, IMDA
Carrier: Vodafone, Deutsche Telekom, Telefónica, Verizon, AT&T, T-Mobile, Sprint, U.S. Cellular, Rogers, Telus, SKT, LGU+, NTT DOCOMO, SoftBank, KDDI, Telstra |
*Approvals are valid for the integrated cellular module inside the router only. Cellular module approvals are not always applicable for the whole router – see “Standards and Regulations” chart for complete router approvals available.
Software | |
Operating System | ICR-OS (Linux based) |
SW Customization | Router App |
Application Development | Open Linux, *Python, BASH, C/C++, *Node-RED, *Docker |
Networking Features and Protocols | DHCP, NAT/PAT, SSH, VRRP, PPPoE, SNMP, SMTP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, NTP Client/Server, *Routing protocols RIP, BGP, OSPF, IS-IS, NHRP, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack |
Industrial Protocols and IoT | *Modbus RTU/TCP gateway, *IEC 60870-5-101 to 104 gateway, *DF1, *DNP3, *MQTT, *LWM2M |
Security |
HTTPS, SSH, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering) VPN Tunneling – WireGuard, OpenVPN, *EasyVPN, IPsec with IKEv1 and IKEv2, GRE, L2TP, PPTP Authentication – RADIUS, TACACS+, *SCEP
Encryption – DES, 3DES, AES, RSA, MD5, SHA |
Firmware Management | Automatic firmware updates – server, locally via LAN or remotely via WAN Over-the-Air cellular module firmware updates |
Diagnostic/Log |
Status – Signal Strength, Data Usage, Detailed Long Term Statistics
One CLICK report – Current Configuration, Factory Identification, Routing Table Log – System Log, Reboot Log, Kernel Log Remote Diagnostics (via SSH) |
Event Engine | StartUp script & Up/Down script (Own rules based on Digital Inputs, Network Parameters, Data Usage, Timer, Power, Device Temperature) Report Types: SMS, email, SNMP Trap |
Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup & Restore configuration |
Advanced Software Tools | WebAccess/DMP – Remote Device Provisioning, Monitoring & Management Platform WebAccess/VPN – Advanced Secure Networking Platform |
*Functionality is available with installed Router App
Accessories
Included in the package | Optional | ||
Part Number | Description | ||
Wall mount kit | ü | ||
BB-DIN-ICR32 | DIN clip | ü | |
BB-CON-ICR32-10 | Serial / IO connector | ü | |
BB-CON-WR2 | PWR connector | ü | |
ANT-LTE5G-025 | Antenna 5G/LTE Terminal | ü | |
BB-RPS-v2-WR2-EU | Wall mount Power Supply 12V/1A, EU plug | ü | |
BB-RPS-v2-WR2-UK | Wall mount Power Supply 12V/1A, UK plug | ü | |
BB-RPS-v2-WR2-US | Wall mount Power Supply 12V/1A, US plug | ü | |
BB-RPS-v2-WR2-AUS | Wall mount Power Supply 12V/1A, AUS plug | ü |
我们网站向用户提供的cookie来增强您的用户体验,个性化内容,并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie,请点击“接受所有cookie”。
或者,点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息,并选择您希望我们使用的cookie类型。