Specifications
Analog Input
§ Channels 8
- Mode Differential input
- Resolution 16 bits
- Sample Rate 250 kS/s
§ Input Impedance 1 GÙ
- Sampling Mode Software and external clock
- Input Range Software programmable
| Range |
±10 V |
±5 V |
±2.5 V |
±1.25 V |
±0.625 V |
| Accuracy |
±0.01% |
±0.01% |
±0.01% |
±0.01% |
±0.01% |
| Range |
|
0 ~ 10 V |
0 ~ 5 V |
0 ~ 2.5 V |
0 ~ 1.25 V |
| Accuracy |
|
±0.01% |
±0.01% |
±0.01% |
±0.01% |
Accuracy
Analog Output
§ Channels 2
- Resolution 16 bits
- Output Rate 3 M
| Internal Reference |
Unipolar |
0 ~ 5 V, 0 ~ 10 V |
| Bipolar |
-5 V ~ 5 V, -10 V ~ 10 V |
| External Reference |
0 ~ +x V @ -x V (-10 £ x £ 10) |
- Output Range Software programmable
- Slew Rate 20 V/µs
- Driving Capability ±20 mA max
- Operation Mode Static update, Buffered (Waveform generation)
- Accuracy 01%
Analog Trigger
§ Channels 2
- Resolution 16 bits
- Input Range -10 ~ 10 V
- Hysteresis Hysteresis range is configurable
- Trigger Edge Rising edge or falling edge, selected by software
Digital Trigger
§ Channels 2
- Input Voltage Logic 0: 5 V max. Logic 1: 3.5V min.
- Trigger Edge Rising edge or falling edge, selected by software
Digital I/O
- Channels 32 (shared)
- Input Voltage Logic 0: 5 V max. Logic 1: 3.5 V min.
- Output Voltage Low 5 V max. @ 20 mA sink
High 4.5 V min. @ 20 mA source/5.2 V max.
Counter/ Timer/ Encoder
§ Channels 4
- Resolution 32 bits
- Compatibility 5 V/TTL
- Input Frequency 10 MHz
- Counter/Timer Functions Frequency measurement, pulse width
measurement, pulse output, PWM output
- Encoder Functions Quadrature (X1, X2, X4), dual pulse (CW/CCW),
signed pulse (OUT/DIR)
General
- Form Factor PCI Express x1
- I/O Connector 100-pin SCSI female ribbon-type connector
- Dimensions (L x W) 175 x 100 x 18 mm3 (6.9 x 9 x 0.7 in.3)
- Operating Temperature 0 ~ 60 °C (32 ~ 140 °F) (refer to IEC 68-2-1, 2)
- Storage Temperature -40 ~ 70 °C (-40 ~ 158 °F)
- Storage Humidity 5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
- Board ID TM switch
Ordering Information
- PCIE-1812-B 250 kS/s, 16-bit, 8-ch simultaneous sampling
multifunction card
Accessories
- PCL-101100R-1E 100-pin SCSI shielded cable, female to male, 1 m
- PCL-101100R-2E 100-pin SCSI shielded cable, female to male, 2 m
- ADAM-39100-BE 100-pin DIN rail SCSI wiring board
- PCLD-8813-AE 6Advanced Signal Conditioning Board for
PCIE-1812/PCIE-1813
- PCLD-8811-AE Low-Pass Active Filter Boar
- 1700030423-01 10-pin flat cable for MDSI synchronization, 10 cm
