Specifications
Analog Input
- Channels 16/8 differential
§ Analog-to-digital converter 18 bits
(ADC) resolution
- Input range ±20 V, ±12.5 V, ±10 V, ±5 V, or
±20 mA, software configurable per channel
§ Maximum input voltage ±20 V
- Input common-mode voltage range
±20 V range ±10 V
±12.5 V range ±6.25 V
±10 V range ±5 V
±5 V range ±2.5 V
§ Over-voltage protection ±30 V
§ Input impedance
Voltage input 1 MÙ
Current input 500 Ù
§ Analog low-pass filter
-3 dB bandwidth 22.5 kHz or 250 kHz, software configurable per channel
- Acquisition type Instant or buffered, software configurable
Buffered Acquisition
- Enabled channel Each channel can be enabled/disabled independently
combination by software
- Sample rate 1 MHz , for all channels, simultaneous sampling, software configurable
- On-board FIFO Size 8192 Samples
Absolute accuracy
§ Voltage input
Operating temperature within ±5°C of last
Auto-calibration temperature ±0.01% of full-scale range max. Over full operating temperature range ±0.05% of full-scale range max.
§ Current input
Operating temperature within ±5°C of last
Auto-calibration temperature ±0.1% of full-scale range max. Over full operating temperature range ±0.5% of full-scale range max.
DC Performance(2)
| § Idle channel noise |
275 μVRMS |
| § ENOB |
17.14 bits |
| AC Performance(2) |
|
| § SNR |
88.36 dB |
| § THD |
-103.09 dB |
| § THD+N |
-85.29 dB |
| § SFDR |
101.95 dB |
| § Dynamic Range |
94.71 dB |
| § Crosstalk |
-104.13 dB |
Trigger
§ Number of triggers 2
- Trigger action Start, delay to start, stop, or delay to stop
- Trigger delay range 0 ~ 16,777,215 samples
- Sample number 0 ~ 16,777,215 samples
Analog Trigger(1)
- Channel 2 (start and stop)
- Source One of the analog input channels, software configurable
- Threshold level Full scale of analog input range, software configurable
- Hysteresis 1/256 of analog input range, software configurable
- Polarity Rising edge or falling edge, software configurable
Digital Trigger(1)
- Source 2 external pins
- Input logic level Logic high 2.0 V min.
Logic low 0.8 V max.
- Working voltage -0.25 V ~ 5.25 V
- Polarity Rising edge or falling edge, software configurable
- Input protection voltage -0.5 V ~ 5V
Mechanical
- Connector Type DB-62 connector
- Dimension 175 x 100mm (6.9" x 93")
- Weight 12 kg
Environment
- Operating temperature 0 °C to 60 °C (-4 °F to 140 °F)
- Storage temperature -40 °C to 70 °C (-40 °F to 158 °F)
- Operating humidity 10% to 90% RH, non-condensing
- Storage humidity 5% to 95% RH, non-condensing
Certification
Ordering Information
- PCIE-1841-A 16-ch, 18-bit, 1MS/s/ch, simultaneous sampling card
- PCIE-1841L-A 8-ch, 18-bit, 1MS/s/ch, simultaneous sampling card
Accessories
- ADAM-3962-AE DB-62 Wiring Terminal, DIN-rail Mount
- PCL-10162-1E DB-62 Shielded Cable, 1m
- PCL-10162-3E DB-62 Shielded Cable, 3m
- 1700030423-01 10 pin Flat Cable for MDSI synchronization, 10cm
- Total 2 triggers available, trigger mode and type selectable between analog/digital triggers
- For detailed information, please refer to user manual
