PCIE-1805

Specifications
Analog Input
Channels 32 single-ended, 16 differential, or combination
Resolution 16 bits
Max. Sampling Rate 1MS/s, shared by all enabled channels
Overvoltage Protection 30 Vp-p
Input Impedance AI+ to AGND (Single Ended): >1000 GΩ in parallel
with 9 pF
AI+ to AI- (Differential): >1000 GΩ in parallel with
6 pF

Sampling Modes Software and onboard programmable pacer
Input Range ±10 V/±5 V/±2 V/±1 V/0 ~ 20 mA/4 ~ 20 mA

Offset error < ±0.5 mV (Voltage Mode);
< ±2.5 μA (Current Mode)
Gain error < ±0.01 % (Voltage Mode);
< ±0.05 % (Current Mode)
RMS Noise 0.1mV
Auto calibration Yes
Multi-card synchronization Yes
Trigger & Clock Input
Trigger mode Start, delay to start, stop, delay to stop
Trigger source 2 external digital triggers and 2 analog triggers
from AI channels
Clock input 2 digital trigger inputs, and 1 conversion clock
input
Trigger Input voltage Logic 0: 0.8 V max. (0 V min.)
Logic 1: 2.0 V min. (5 V max.)
Trigger and Clock Output
Channels 2 multi-function outputs
Output capability Logic 0: 0.8 V max. @ 10 mA
Logic 1: 2.0 V min. @ -10 mA
General
Bus Type PCI Express x1

I/O Connector 1 x DB62 female connector
Dimensions (L x H) 168 x 98 mm (6.6" x 3.9")

Power Consumption +3.3 V 300 mA typ./320mA max.
+12 V 70mA typ. / 90mA max.
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Storage Humidity 5 ~ 95% RH, non-condensing (refer to IEC 68-2-
3)

Ordering Information
PCIE-1805-AE 1MS/s, 16bit, 32-ch Analog Input PCIE Card
Accessories
ADAM-3962-AE DB-62 Wiring Terminal, DIN-rail Mount
PCL-10162-1E DB-62 Shielded Cable, 1m
PCL-10162-3E DB-62 Shielded Cable, 3m
1700030423-01 10 pin Flat Cable (Multi-card synchronization), 10cm