iDAQ-751

 

Specifications

Isolated Digital Input

§ Channels                                16

• Input type Sink (NPN)

§ Input logic level (referenced to DICOM)

OFF state 0 V ~ +3 V

iDAQ-751

Specifications

• Channels 48, software configurable for input or output

Digital Input

• Input logic level Logic high 5 V min. Logic low    1.5 V max.

iDAQ-763D

Specifications

Solid State Relay (SSR) Output

§ Channels                                16

• Load voltage 60 VDC
• Load current 3 A max.@ 25 °C / 0.7 A max.@

60 °C per channel

 

§ Input current draw

ON state        +10 V ~ +40 V OFF state 1 mA max.

§ Input protection voltage

Working voltage -0.25 V ~ 5.25 V

-0.5V~6.5V

• Peak load current 4 A (100 ms, 1 pulse)
• Output impedance 13 Ù typ./0.5 Ù max.

 

§ Input protection voltage

• Response time

§ Debounce filter

• Isolation protection

ON state        3 mA max.

+60 V max, -8 V min.

100 μs max.

10 μs ~ 84 ms, software configurable

§ Pull-down resistor                    50 kÙ

• Response time 5 μs
• Debounce filter 12 μs ~ 84 ms, software configurable
• Acquisition type Instant or buffered, software

• OFF-state leakage current 1 μA
• Response time Turn-on time 1.0 ms typ./1.3 ms

max.

Turn-off time 0.6 ms typ./0.8 ms

 

§ Acquisition type

• Buffered acquisition

600 VRMS

Instant or buffered, software configurable

§ Buffered acquisition

configurable

Sample rate

10 kHz max., software configurable

• Isolation protection 600 VRMS
• Power-on output state OFF state

max.

 

 

 

§ Edge detection

Sample rate

10 kHz max., software configurable Internal data buffer (FIFO) size 512 samples, each sample

contains state of all channels Interrupt Rising edge, falling edge, or both edges, software configurable for each channel independently

Internal data buffer (FIFO) size 256 samples, each sample contains state of all channels

§ Interrupt                                   Edge detection

Rising edge, falling edge, or both edges, software configurable for each channel independently

Pattern match detection

• Acquisition type Static or buffered, software configurable

§ Buffered output                        Update rate

500 Hz max., software configurable

Internal data buffer (FIFO) size

512 samples, each sample contains state of all channels

 

• Pattern match detection By port detection, each channel can

be enabled or disabled by software

By port detection, each channel can be enabled or disabled by software

General

• Power consumption from chassis 225 mW / 800 mW max.

 

§ Frequency

• Other feature

§ Timing signal output to chassis

independently 1 kHz max.

Latch digital input states when interrupt occurs

From one of the digital input channels or digital input pattern match event, software configurable

§ Other feature

• Trigger output to chassis

 

Digital Output

independently

Frequency 1 kHz max.

Latch digital input states when interrupt occurs

From one of the digital input channels or pattern match output, software configurable

• Dimensions 100 x 80 x 25 mm (3.94 x 15 x 0.98 in.)
• Operating temperature -20 °C to 60 °C (-4 °F to 140 °F)
• Storage temperature -40 °C to 70 °C (-40 °F to 158 °F)
• Operating humidity 10% to 90% RH, non-condensing
• Storage humidity 5% to 95% RH, non-condensing
• Vibration 5Grms
• Shock 30G

 

Universal Isolated Digital Output

• Channels 16
• Output type Sink (NPN) or source (PNP), software

• Output logic level Logic high 0 V min. @ 2 mA

source, 5.2 V max.

Logic low   0.3 V max. @ 2 mA

• Certification EMC: CE, FCC Safety: CB, UL

 

 

§ Load voltage

configurable per port (8-channel)

+10 V ~ +40 V

sink

• Output current One channel

5 mA max.

Ordering Information

 

• Load current 350 mA per channel
• Output impedance 2 Ù max.
• Response time 100 μs
• Isolation protection 600 VRMS

§ Current limit protection            Yes

• Flyback diode protection Yes
• Power-on output state OFF state
• Acquisition type Static or buffered, software

configurable

§ Buffered output                        Update rate

10 kHz max., software configurable

§ Response time

• Default output state

§ Acquisition type

• Buffered output

 

 

General

All channels summed 64 mA max. 5 μs max.

Logic low

Static or buffered, software configurable

Update rate

10 kHz max., software configurable Internal data buffer (FIFO) size 256 samples, each sample contains state of all channels

• iDAQ-763D-AE 16-ch SSR Output iDAQ module

 

 

 

General

Internal data buffer (FIFO) size 512 samples, each sample contains state of all channels

• Power consumption from chassis 05 W typ. / 1.5 W max.
• Dimensions 100 x 80 x 25 mm (3.94 x 15 x 0.98

in.)

• Operating temperature -20 °C to 60 °C (-4 °F to 140 °F)
• Storage temperature -40 °C to 70 °C (-40 °F to 158 °F)

 

• Power consumption from chassis 425 mW / 450 mW max.
• Dimensions 100 x 80 x 25 mm (3.94 x 15 x 0.98

in.)

• Operating temperature -20 °C to 60 °C (-4 °F to 140 °F)
• Storage temperature -40 °C to 70 °C (-40 °F to 158 °F)
• Operating humidity 10% to 90% RH, non-condensing
• Storage humidity 5% to 95% RH, non-condensing
• Vibration 5Grms
• Shock 30G
• Certification EMC: CE, FCC

Safety: CB, UL

 

Ordering Information

• iDAQ-731-AE 16-ch IDI and 16-ch Universal IDO iDAQ module

• Operating humidity 10% to 90% RH, non-condensing
• Storage humidity 5% to 95% RH, non-condensing
• Vibration 5Grms
• Shock 30G
• Certification EMC: CE, FCC

Safety: CB, UL

Ordering Information

• iDAQ-751-AE 48-ch TTL Digital I/O iDAQ module

Optional Accessories

• PCL-10162-1E DB-62 Shielded Cable, 1m
• PCL-10162-3E DB-62 Shielded Cable, 3m
• ADAM-3962-AE DB-62 Wiring Terminal, DIN-rail Mount