ECU-P1624D

Specifications

General

• Connector 120-pin connector for ECU-4784/PCIe+PCI
• Dimensions 3" x 6.0" (136 x 150 mm)
• Power Consumption 5V ± 5% @ 500mA 3.3V ± 5% @ 180mA typical.
• Certification CE/FCC

Communication

• IRQ All COM ports use the same IRQ assigned by PCI Bus
• COM Ports 4 x RS-232/422/485 ports
• Baud rate (bps) RS-232: 50 ~ 2 kbps RS-422/485: 50 ~ 921.6 kbps (Max.)
• Data Signals TxD, RxD, RTS, CTS, RI, DSR, DTR, DCD, GND for RS-232Data+, Data-, GND for RS-485Tx+, Tx-, Rx+,Rx-, GND for RS-422

IRIG Time Code Input

• IRIG Interface Male 9-pole D-Sub connector (COM4 or IRIG-B)
• ST Multi-Mode Fiber connector Female BNC
• Input Signal RS-422 input signal isolated by optocoupler Optical signal @ 820nm; TTL
• Supported Formats IRIG-B according to IRIG STANDARD 200-04, 200-98

IRIG Time Code Output

• IRIG Interface Male 9-pole D-Sub connector (COM4 or IRIG-B) Female BNC
• Output Signal RS-422 output signal; TTL

IRIG Time Code Decoding

• Message syntax YYYYQQQHHMMSS (yr, d, h, min, sec)
• Resolution of the time 1s
• Status info 1 status LED for indication

Protection

• Isolation Protection 2500 VDC for COM/IRIG

Environment

• Operating -20 ~ 70°C (-4 ~ 158°F)
• Operating Humidity 10 ~ 90% RH non-condensing (refer to IEC 60068-2-3)
• Storage Humidity 5 ~ 95% RH non-condensing (refer to IEC 60068-2-3)

Ordering Information

• ECU-P1624D-B 4-port RS-232/422/485 and IRIG B for ECU-4784