Specifications
System | |
CPU | ARM Cortex-A8, 1000 MHz |
Memory |
RAM - 512 MB
NOR Flash - 256 MB MRAM - 128 KB (128 MB for Router APPs, 128 kB for customer data) |
Watchdog | HW Watchdog |
RTC | Battery backup RTC |
Interfaces | |
Ethernet | 2× Ethernet, RJ45, 10/100 Mbps, Isolation 1.5 kV |
Port expansion option BB-SR310xx1xx | 3-port Ethernet switch, RJ45, 10/100 Mbps, Isolation 1.5 kV |
Port expansion option BB-SR310xx3xx | 1× RS232 (Tx, Rx, GND, RTS, CTS), 5-pin terminal block, Isolation 2.5 kV 1× RS485/422 (2× TxRx+, 2× TxRx-), 4-pin terminal block, Isolation 2.5 kV |
Port expansion option BB-SR310xx4xx | 1× Ethernet, RJ45, 10/100 Mbps, Isolation 2.5 kV
1× RS232 (AUX, GND, Tx, Rx), 4-pin terminal block (no isolation) 1× RS485 (TxRx+, TxRx-, GND), 3-pin terminal block, Isolation 2.5 kV |
I / O |
2× Digital Input (60 V AC/DC, 7 mA)
1× Digital Output (60 V AC/DC 300 mA) (6-Way Molex connector) |
USB | 1× USB 2.0 Host Connector |
MicroSD Card | 1× Micro SD Card Slot (SDHC, SDXC) |
Reset Button | Factory reset |
LED Indicators | System-power, Data activity, 3-level signal strength, SIM1/SIM2 status, PoE status, Input 0 status, Input 1 status, Output state, User, ETH |
GNSS | |
Antenna | 1× SMA connector, active (50 mA) |
Systems | GPS, GLONASS, BeiDou, Galileo |
Protocol | NMEA 0183 v3.0 |
Ac Time-to-First-Fix | Hot start 1 s, Warm start: 29 s, Cold 32 s |
Environmental | |
Power Supply | 10 – 60 V DC (2-Way Molex connector) |
Consumption | Idle 2.5 W / Average 4 W / Peak 11 W |
Sleep Mode | Yes, 10 mW |
Operating Temperature | -40 to +75 °C |
Storage Temperature | -40 to +85 °C |
Humidity | 5 to 95 % |
IP Cover | IP30 |
Physical Characteristics | |
Dimensions | 55 × 97 × 125 mm |
Enclosure | Robust Metal Case or Plastic Case |
Mounting | DIN Rail |
Weight | Metal version: 375 g Plastic version: 170 g |
WiFi - Optional | |
Antenna | 1× R-SMA connectors |
Standards | IEEE802.11 a/b/g/n 2.4 GHz / 5 GHz |
Security | WEP, TKIP, AES, WPA, WPA2, 802.1X |
Modes | Access Point (max 10 clients), Station, Multirole STA & AP |
PoE PD: parameters for opposite PSE device - Optional | |
Input voltage range | 42.5 – 57 V DC, IEEE 802.3af-2003 |
Power available | 25.50 W |
Maximum current | 600 mA |
PoE+ PSE parameters - Optional | |
Power supply needed | 42.5 – 57 V DC |
Power available | 2× 25.50 W (ETH0, ETH1), IEEE 802.3at-2009 (PoE+) |
Cellular Interface | |
SIM Slots | 2× SIM (Mini SIMs – 2FF) |
Antennas | 2× SMA connector (1× Main, 1× Diversity) |
LTE Parameters |
Supported FDD frequencies: B1 (2100 MHz)/ B2 (1900 MHz)/ B3 (1800 MHz)/ B4 (1700 MHz)/ B5 (850 MHz)/ B7 (2600 MHz)/ B8 (900 MHz)/ B12 (700 MHz)/ B13 (700 MHz)/ B18 (800 MHz)/ B19 (800 MHz)/ B20 (800 MHz)/ B25 (850MHz)/ B26 (850 MHz)/ B28 (700 MHz)
Supported TDD frequencies: B38 (2600 MHz)/ B39 (1900 MHz)/ B40 (2300 MHz)/ B41 (2500 MHz) Transfer rate: up to 150 Mbps (DL), 50 Mbps (UL) |
HSPA+/UMTS Parameters | Supported frequencies: B1 (2100 MHz)/ B2 (1900 MHz)/ B4 (1700 MHz)/ B5 (850 MHz)/ B6 (800 MHz)/ B8 (900 MHz)/ B19 (800 MHz) Transfer rate: 42 Mbps (DL), 5.76 Mbps (UL |
EDGE/GPRS Parameters | Supported frequencies: B2 (1900 MHz)/ B3 (1800 MHz)/ B5 (850 MHz)/ B8 (900 MHz) Transfer rate: 296Kbps (DL), 236.8Kbps (UL) |
Standards & Regulations | |
Radio | EN 301 511, EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 303 413, EN 301 893, EN 300 328, FCC part 22H, FCC part 24E, FCC part 27, FCC part 90R, PTCRB |
EMC | ETSI EN 301 489-1, ETSI EN 301 489-17, ETSI EN 301 489-19, ETSI EN 301 489-52, EN 55032, EN 61000-4-2, EN IEC 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN
61000-4-6, IEC 61000-6-2, IEC 61000-6-3, FCC Part 15 Subpart B, ICES-003 Issue 6 |
Safety | EN IEC 62368-1, UL E487720 |
National | CE, TELEC (Japan), UKCA, FCC, IC |
Carrier Approval | AT&T, T-mobile, Verizon |
Mechanical | EN 60068-2-64, EN 60068-2-27 |
Climatic | EN 60068-2-1, EN 60068-2-2, EN 60068-2-14, EN 60068-2-30 |
Environmental | RoHS3, Reach, WEEE |
Software
Operating System | ICR-OS (Linux based) |
SW Customization | Router App (User Modules)* |
Application Development | Open Linux, *Python, BASH, C/C++, *Node-RED |
Industrial Protocols and IoT | *Modbus RTU/TCP gateway, *IEC 60870-5-101 to 104 gateway, *DF1, *DNP3, *MQTT, *LWM2M |
Networking Features and Protocols | DHCP, NAT/PAT, SSH, VRRP, PPPoE, SNMP, SMTP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, NTP Client/Server, *Routing protocols RIP, BGP, OSPF, IS-IS, NHRP, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack |
Security |
HTTPS, SSH, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering) VPN Tunneling – WireGuard, OpenVPN, *EasyVPN, IPsec with IKEv1 and IKEv2, GRE, L2TP, PPTP Authentication – RADIUS, TACACS+, 2FA, *SCEP
Encryption – DES, 3DES, AES, RSA, MD5, SHA |
Firmware Management | Automatic firmware updates – server, locally via LAN or remotely via WAN Over-the-Air cellular module firmware updates |
Diagnostic/Log |
Status – Signal Strength, Data Usage, Detailed Long Term Statistics
One CLICK report – Current Configuration, Factory Identification, Routing Table Log – System Log, Reboot Log, Kernel Log Remote Diagnostics (via SSH) |
Event Engine | StartUp script & Up/Down script (Own rules based on Digital Inputs, Network Parameters, Data Usage, Timer, Power, Device Temperature) Report Types: SMS, email, SNMP Trap |
Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup & Restore configuration |
Advanced Software Tools | WebAccess/DMP – Remote Device Provisioning, Monitoring & Management Platform WebAccess/VPN – Advanced Secure Networking Platform |
*Functionality is available with installed RouterApp (User Module)
Accessories
Part Number |
Description |
Included in Package
BB-SR310xxxx5 |
Included in Package
BB-SR310xxxx0 |
Sold Separately |
BB-2JW0124Z-C868B | Antenna LTE, Terminal | ü | ü | |
BB-GA.110.101111 | Antenna LTE, Magnet Mount | ü | ||
BB-AW-A2458G-FSRPK | Antenna Wi-Fi, 2.4 & 5.8 GHz | ü BB-SR3101xxx5 | ü | |
BB-RPS-v3-MO2-M | SmartFlex Power Supply, 12V/1A, EU,US,UK,AU | ü | ü | |
BB-RPS-v3-MO2-EU | SmartFlex Power Supply, 12V/1A, EU plug | ü | ||
BB-RPS-v3-PSE | SmartFlex Power Supply, 48V/1.35A (power cord required) | ü | ||
BB-PWRCORD-US | US Power Supply Power Cord | ü | ||
BB-PWRCORD-EU | EU Power Supply Power Cord | ü | ||
BB-PWRCORD-UK | UK Power Supply Power Cord | ü | ||
BB-PWRCORD-AU | AU Power Supply Power Cord | ü | ||
BB-SBD40 | DIN Rail Clip - metal | ü BB-SR310xxx2x | ü BB-SR310xxx20 | ü |
BB-CPD3 | DIN Rail Clip - plastic | ü BB-SR310xxx1x | ü BB-SR310xxx10 | ü |
BB-KN-v3-MO2-3 | PS Cable 2-wire, MO 2 pins, 3m, v3 routers | ü | ü | |
BB-KIO-v3-MO6-3 | IO Cable 6-wire, 3m, v3 routers | ü | ||
BB-KD-ETH | Ethernet cross cable | ü | ü |
我们网站向用户提供的cookie来增强您的用户体验,个性化内容,并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie,请点击“接受所有cookie”。
或者,点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息,并选择您希望我们使用的cookie类型。