Features
- Suitable for EtherCAT networks
- 8 x 16-bit analog input channels with 2,500 VDC isolation
- Wide common-mode voltage range (±275 V)
- Removable European-type connector
- Supports EtherCAT distributed clocks (DC) mode and SyncManager mode
- 2 x Rotating switches that support up to 256 SubDevice IDs
Introduction
AMAX-4817 is an industrial-grade remote I/O SubDevice module equipped with the EtherCAT protocol. European-type pluggable terminal blocks facilitate module setup and maintenance, while the compact size and support for DIN-rail mounting ensure easy installation in cabinet configurations. For safe and reliable operation, all of the 8 analog input channels are protected by a 2,500 VDC isolation circuit.
Specifications
Communication
- Interface EtherCAT
- Data Transfer Medium Ethernet/EtherCAT cable (min. CAT 5), shielded
- Distance Between Modules 100 m (100BASE-TX)
- Communication Cycle Time 100 μs (guarantees all channel data are updated)
- Data Transfer Rates 100 Mbps
Analog Input
- Channels 8
- Resolution 16 bits
- Input Range 0 ~ 10V, ±10V, 0~20mA, ±20mA
- Input Impedance 500Ù
- Common-Mode Voltage Range ±275 V
- Measurement Error <±0.1%
- Isolation Protection 2,500 VDC
- Bandwidth(-3dB) 375KHz/ch
- Conversion Time 40 μs for all channels
Note: Because the analog sampling rate exceeds the communication cycle time, the maximum polling rate will be limited by the communication cycle time = 10 kS/s for each channel.
General
- Connectors 2 x 10-pin terminal block (I/O), 81 mm
Ordering Information
- AMAX-4817-B 8-ch, 16-bit isolated AI EtherCAT remote I/O module
- 96PSD-A40W24-MM DIN rail A/D 100 ~ 240 V, 40 W, 24 V
