搜索产品
搜索文章
HW SPECIFICATIONS
PORTS, LED, ANTENNAS | |
5x ETH ports | RJ45, 10/100 Mbps |
LED Indicators | PWR, ETH, USR, POE, IN0, IN1, OUT |
Wi-Fi Antenna (sold separately) | R-SMA connector |
USB | USB Host connector 2.0 |
SD Card | 1x Micro SD Card slot (rear panel) |
RST | RESET button (rear panel) |
POWER | |
Power Supply (sold separately) | 10 – 60 VDC (2–Way Molex connector |
Power Consumption |
Idle: 2.5 W
Average: 4 W Peak: 11 W Sleep Mode: 10mW |
ENVIRONMENTAL | |
Temperature Range | Operating: -40 to +75 °C
Storage: -40 to +85 °C |
Humidity | Operating: 0 to 95 %
Storage (Non-condensing): 0 to 95 % |
Cold Start | -35 °C |
Operating Altitude | 2000 m / 70 kPa |
Ingress Protection Rating | IP30 |
WI-FI - 802.11 A/B/G/N, AP OR CLIENT MODES *Optional | |
Supported Wi-Fi band | 2.4 GHz, 5.4 GHz |
Encryption | None, WEP, TKIP, AES |
5 GHz supported channels | 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 |
2.4 GHz supported channels | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 |
Number of clients | 10 |
Authentication | Open, Shared, WPA–PSK, WPA2–PSK |
POE PARAMETERS | POE PD
parameters for opposite PSE |
P0E PSE |
Input voltage range | 42.5 – 57 V | 44 – 57 V, 65 W |
Power available | 25.50 W | 2x 25.50 W (ETH0, ETH1) |
Maximum current | 600 mA | |
Insul. Strength | 1.5 kV from the router | none |
Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling needed is Category 5, up to 12.5 Ω. It is possible to use a passive PoE injector |
MECHANICAL | |
Plastic or metal case with plastic or metal DIN rail | |
Enclosure Dimensions | 55x97x125 mm |
Weight Plastic | 170 g |
Weight Metal | 375 g |
Network and Routing | DHCP Server, , DHCP Client, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, NTP Client/ Server, IGMP, BGP, OSPF, RIP, SMTP, SMTPS, SNMP v1/ v2c/ v3, Backup routes, PPP, PPPoE, SSL, Port Forwarding, Host Port Routing, Ethernet Bridging |
Security | HTTPS, SSH, VPN tunnels, SFTP, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering), DMZ (via iptables) |
VPN Tunnelling | Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, DMVPN, IPSec with IKEv1 and IKEv2 |
Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server Backup configuration, Restore configuration |
Firmware Management | Automatic firmware update from server, Locally via LAN and USB, Over-the-Air software updates |
Diagnostic | One CLICK report – current configuration / factory identification / system log / kernel log / reboot log / routing table, Remote diagnostics possible via SSH |
Status | Network Status, DHCP Status, IPSec Status, Statistics history for last 60 days |
Log | System Log, Reboot Log, Kernel Log |
Controlling and Diagnostic | SNMP v1/v2c/v3, Statuses, Log |
Event Engine | StartUp script & Up/Down script (Bash), Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature Report Types: email, SNMP Trap |
Other | IPv6 support |
STANDARDS AND REGULATIONS
INDUSTRY CERTIFICATIONS & APPROVALS | |
SR300 - EMEA | |
Radio | ETSI EN 300 328, ETSI EN 301 893 |
EMC | ETSI EN 301 489-1, ETSI EN 301 489-1, ETSI EN 301 489-17 |
Safety |
IEC 62368-1 (UL E487720), EN 62311 UL C1D2
UL E486108 * |
National | CE, UKCA compliant |
* Excluding versions with PoE PSE.
ACCESSORIES
ORDER CODE | DESCRIPTION |
BB-AW-A2458G-FSRPK | Antenna Wi-Fi, 2.4 & 5.8 GHz |
BB-RPS-v3-MO2-M | SmartFlex Power Supply, 12V/1A |
BB-RPS-v3-PSE | SmartFlex Power Supply, 48V/1.35A (power cord required) |
BB-PWRCORD-US | USA - Power Supply Power Cord |
BB-PWRCORD-EU | EU - Power Supply Power Cord |
BB-PWRCORD-UK | UK - Power Supply Power Cord |
BB-PWRCORD-AUS | AU - Power Supply Power Cord |
BB-SBD40 | DIN Rail Clip - metal |
BB-KN-v3-MO2-3 | PS Cable 2-wire, MO 2 pins, 3m, v3 routers |
BB-KIO-v3-MO6-3 | IO Cable 6-wire, 3m, v3 routers |
我们网站向用户提供的cookie来增强您的用户体验,个性化内容,并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie,请点击“接受所有cookie”。
或者,点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息,并选择您希望我们使用的cookie类型。