ADAM-6015

Specifications

Analog Input
ƒ Channels 7 (differential)
ƒ Input Impedance > 10 MΩ
ƒ Input Connections 2 or 3 wire
ƒ Input Type Pt, Balco and Ni RTD
ƒ RTD Types and Temperature Ranges
Pt 100 -50°C ~ 150°C
0°C ~ 100°C
0°C ~ 200°C
0°C ~ 400°C
-200°C ~ 200°C
Pt 1000 -40°C ~ 160°C
Supports both IEC 60751 ITS90 (0.0385 W/W/°C)
and JIS C 1604 (0.0392 W/W/°C)
Balco 500 -30°C ~ 120°C
Ni 518 -80°C ~ 100°C
0°C ~ 100°C
ƒ Accuracy ± 0.1 % or better
High speed mode ±0.5% or better
ƒ Span Drift ± 25 ppm/°C
ƒ Zero Drift ± 6 μV/°C
ƒ Resolution 16-bit
ƒ Sampling Rate
10 sample/ second (total)
High speed mode:1K sample/second (total)
CMR @ 50/60 HZ 90dB
NMR @ 50/60 HZ 60dB
* high speed mode does not support CMR/NMR
ƒ Wire Burnout Detection

Ordering Information
ƒ ADAM-6015 7-ch Isolated RTD Input
Modbus TCP Module

Common Specifications

General
ƒ LAN 10/100Base-T(X)
ƒ Power Consumption 2.5 W @ 24 VDC (ADAM-6015)
2.7 W @ 24 VDC (ADAM-6017)
2 W @ 24 VDC (ADAM-6018)
ƒ Connectors 1 x RJ-45 (LAN), Plug-in screw
terminal block (I/O and power)
ƒ Watchdog System (1.6 second) and
Communication (programmable)
ƒ Power Input 10 ~ 30 VDC
ƒ Supports Peer-to-Peer
ƒ Supports GCL
ƒ Supports Modbus/TCP, TCP/IP, UDP, HTTP and
MQTT (ADAM-6017) Protocols
Protection
ƒ Over Voltage ±35 VDC

Protection
ƒ Isolation Protection 2,000 VDC
ƒ Built-in TVS/ESD Protection
ƒ Power Reversal Protection

Environment
ƒƒ Operating -10 ~ 70°C (14 ~ 158°F)
Temperature -40 ~ 70°C (-40~158°F)
(ADAM-6017-D)
ƒƒ Storage Temperature -20 ~ 80°C (-4 ~ 176°F)
-40 ~ 80°C ( -40~176°F)
(ADAM-6017-D)
ƒ Operating Humidity 20 ~ 95% RH
(non-condensing)
ƒ Storage Humidity 0 ~ 95% RH
(non-condensing)