搜索产品
搜索文章
Advantech BB-SR30508010 is a SmartFlex, NAM, 2x Ethernet, PoE PSE, Plastic, Without Accessories
如需帮助,请联系我们
免费电话：400-880-8951
公司邮箱：advavee@outlook.com
咨询客服：一站式采购
批量采购定制咨询，请发送您的需求，我们将立即回复。
HW SPECIFICATIONS
| POWER | |
| Power Supply (sold separately) | 10 – 60 VDC (2–Way Molex connector |
|
Power Consumption |
Idle: 2.5 W
Average: 4 W Peak: 11 W Sleep Mode: 10mW |
| ENVIRONMENTAL | |
| Temperature Range | Operating: -40 to +75 °C
Storage: -40 to +85 °C |
| Temperature Range LTE450 | Operating: -20 to +60 °C
Storage: -40 to +85 °C |
| Humidity | Operating: 0 to 95 %
Storage (Non-condensing): 0 to 95 % |
| Cold Start | -35 °C |
| Operating Altitude | 2000 m / 70 kPa |
| Ingress Protection Rating | IP30 |
| MECHANICAL | |
| Plastic or metal case with plastic or metal DIN rail | |
| Enclosure Dimensions | 55x97x125 mm |
| Weight Plastic | 170 g |
| Weight Metal | 375 g |
| MECHANICAL | |
| Plastic or metal case with plastic or metal DIN rail | |
| Enclosure Dimensions | 55x97x125 mm |
| Weight Plastic | 170 g |
| Weight Metal | 375 g |
| WI-FI - 802.11 A/B/G/N, AP OR CLIENT MODES | |
| Supported Wi-Fi band | 2.4 GHz, 5 GHz |
| Encryption | None, WEP, TKIP, AES |
| 5 GHz supported channels | 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 |
| 2.4 GHz supported channels | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 |
| Number of clients | 10 |
| Authentication | Open, Shared, WPA–PSK, WPA2–PSK |
| POE PARAMETERS | POE PD
parameters for opposite PSE |
P0E PSE |
| Input voltage range | 42.5 – 57 V | 44 – 57 V, 65 W |
| Power available | 25.50 W | 2x 25.50 W (ETH0, ETH1) |
| Maximum current | 600 mA | |
| Insul. Strength | 1.5 kV from the router | none |
| Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling needed is Category 5, up to 12.5 Ω. It is possible to use a passive PoE injector | ||
STANDARDS AND REGULATIONS
| INDUSTRY CERTIFICATIONS & APPROVALS | |
| SR305 - NAM | |
| Telecom and emission | ETSI EN 301 511 v9.0.2, ETSI EN 300 440-2 v1.4.1
ETSI EN 300 328 v1.8.1, ETSI EN 301 489-17 v2.2.1 |
|
EMC |
FCC 15.107 Class B, FCC 15.109 Class B
FCC ID 2AIQR-SR305, Contains: FCC ID 2AIQR-PLS8-X, IC ID 7830A-PLS8X.WiFi versions contain FCC ID Z64-WL18DBMOD, IC ID 4511-WL18DBMOD. PTCRB ETSI EN 301 489-1 v1.9.2, IEC 61000-6-2:2005, IEC 61000-6-3:2006 |
|
Safety |
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, EN 62311:2008 UL C1D2 and ATEX:
UL 60950-1, 2nd ed. + am1 + am2 * CAN/CSA C22.2 No. 60950-1-07, 2nd ed. + am1 + am2 * UL E486108 * ATEX II 3 G Ex nA IIC T4 Gc, DEMKO 16 ATEX 1801X * NEMA TS2 Compliant |
| Carrier approvals | AT&T, Verizon, Rogers |
* Excluding versions with PoE PSE or RS232-RS485-ETH interface.
| CELLULAR MODULE PARAMETERS | |||
| LTE features | Bit rate 100 Mbps (DL) / 50 Mbps (UL), 3GPP rel. 8 standard; UE CAT. 3 Output power: Class 3 (+23dBm ±2 dB)
Supported bandwidths: 5 MHz, 10 MHz, 20 MHz Supported frequencies: 700 (B13) / 700 (B17) / 850 (B5) /AWS (B4) / 1900 MHz (B2) |
GPRS/EDGE
features |
Bit rate 237 kbps (DL) / 59,2 kbps (UL) GPRS multislot class 12, CS 1 to 4
EDGE multislot class 12, CS 1 to 4, MCS 1 to 9 Supported frequencies: 850 / 900 / 1800 / 1900 MHz |
| HSPA+ features | Bit rate 42 Mbps (DL) / 5,76 Mbps (UL), 3GPP rel. 7 standard; UE CAT. 14, 24 Data compression 3GPP TS25.212
Supported frequencies: 850 (BV) /AWS (BIV) / 1900 MHz (BII) |
GPRS/EDGE
power classes |
EGSM 850 / 900: Class 4 (+33dBm ±2 dB)
GSM 1800 / 1900: Class 1 (+30dBm ±2 dB) GSM 850 / 900: Class E2 (+27dBm ±3 dB) GSM 1800 / 1900: Class E2 (+26dBm +3/-4 dB) |
| UMTS features | PS bit rate 384 kbps (DL) / 384 kbps (UL) Output power: Class 3 (+24dBm +1/-3 dB)
Supported frequencies: 850 (BV) /AWS (BIV) / 1900 MHz (BII) |
||
ACCESSORIES
| ORDER CODE | DESCRIPTION |
| BB-TG.09.0113 | Antenna LTE, Terminal |
| BB-GA.110.101111 | Antenna LTE, Magnet Mount |
| BB-AW-A2458G-FSRPK | Antenna Wi-Fi, 2.4 & 5.8 GHz |
| BB-RPS-v3-MO2-M | SmartFlex Power Supply, 12V/1A |
| BB-RPS-v3-PSE | SmartFlex Power Supply, 48V/1.35A (power cord required) |
| BB-PWRCORD-US | USA - Power Supply Power Cord |
| BB-PWRCORD-EU | EU - Power Supply Power Cord |
| BB-PWRCORD-UK | UK - Power Supply Power Cord |
| BB-PWRCORD-AUS | AU - Power Supply Power Cord |
| BB-SBD40 | DIN Rail Clip - metal |
| BB-CPD3 | DIN Rail Clip - plastic |
| BB-KN-v3-MO2-3 | PS Cable 2-wire, MO 2 pins, 3m, v3 routers |
| BB-KIO-v3-MO6-3 | IO Cable 6-wire, 3m, v3 routers |
SW FEATURES
| SOFTWARE | |
| Network and Routing | DHCP Server, , DHCP Client, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, NTP Client/ Server, IGMP, BGP, OSPF, RIP, SMTP, SMTPS, SNMP v1/ v2c/ v3, Backup routes, PPP, PPPoE, SSL, Port Forwarding, Host Port Routing, Ethernet Bridging |
| Security | HTTPS, SSH, VPN tunnels, SFTP, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering), DMZ (via iptables) |
| VPN Tunnelling | Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, DMVPN, IPSec with IKEv1 and IKEv2 |
| Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server Backup configuration, Restore configuration |
| Firmware Management | Automatic firmware update from server, Locally via LAN and USB or remotely OTA (HTTP, HTTPS), Over-the-Air software updates, Over-the-Air cellular module update from FW |
| Diagnostic | One CLICK report – current configuration / factory identification / system log / kernel log / reboot log / routing table, Remote diagnostics possible via SSH |
| Status | Network Status, DHCP Status, IPSec Status, Statistics history for last 60 days |
| Log | System Log, Reboot Log, Kernel Log |
| Controlling and Diagnostic | SMS, SNMP v1/v2c/v3, Statuses, Log |
| Event Engine | StartUp script & Up/Down script (Bash), Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature Report Types: RAP, SMS, email, SNMP Trap |
| Other | IPv6 support |
BB-SR30508010我们网站向用户提供的cookie来增强您的用户体验，个性化内容，并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie，请点击“接受所有cookie”。
或者，点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息，并选择您希望我们使用的cookie类型。
