Order Codes
Model no. - Order Codes |
REGION |
5× Gigabit Ethernet |
4× PoE PSE+ |
SFP cage (up to 10 Gbps) |
RS232 RS485 CAN BUS |
I/O |
WiFi 802ac |
Operating Temperature |
|
ICR-4401 | GLOBAL* | ü | ü | ü | ü | NONE | -40 to +75 °C | ||
ICR-4401S | GLOBAL* | ü | ü | ü | ü | ü | NONE | -40 to +75 °C | |
ICR-4401W | GLOBAL* | ü | ü | ü | ü | 3×3 MIMO | -40 to +75 °C | ||
ICR-4401WS | GLOBAL* | ü | ü | ü | ü | ü | 3×3 MIMO | -40 to +75 °C | |
ICR-4401W1 | GLOBAL* | ü | ü | ü | ü | 3×3 MIMO | -40 to +60 °C | ||
ICR-4401W1S | GLOBAL* | ü | ü | ü | ü | ü | 3×3 MIMO | -40 to +60 °C |
Specifications
System | |
CPU | Quad-Core ARM Cortex-A72, 1200 MHz |
Memory |
RAM - 1024 MB eMMC - 4096 MB
(838 MB for Router Apps, 512 MB for customer data) |
Watchdog | HW Watchdog |
RTC | Battery backup RTC |
TPM | Trusted Platform Module (TPM) 2.0 |
Interfaces | |
Ethernet |
5× Ethernet (4+1), RJ45, 10/100/1000 Mbps
*Optional 4× PoE PSE, IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) (PoE use is limited – see the ICR-4461 user manual) |
SFP Cage | 1× SFP cage (up to 10 Gbps) |
Serial Lines |
1× RS232 (Tx, Rx, GND, RTS, CTS)
1× RS485 (A(-), B(+), GND) 1× CAN (CAN_H, CAN_L) (14-pin terminal block) |
I / O |
2× Digital Input (3 mA consumption)
2× Digital Output (Open Drain, 48 V / 500 mA) (14-pin terminal block) |
USB | 1× USB 2.0 Host Connector |
MicroSD Card | 1× Micro SD Card Slot |
Reset Button | Reboot / Factory reset |
LED Indicators | System, User, 2× Input, 2× Output, ETH |
Environmental | |
Power Supply | 9 – 48 V DC (2-pin terminal block) |
Consumption |
Without WiFi
Idle 4.2 W / Average 4.2 W / Peak 12.5 W With WiFi Idle 5.4 W / Average 5.5 W / Peak 14.5 W PoE PSE without WiFi Idle 4.4 W / Average 4.6 W / Peak 127 W PoE PSE with WiFi Idle 5.7 W / Average 5.8 W / Peak 129 W |
Sleep Mode | Yes, 24 mW, 310 mW for PoE PSE |
Operating Temperature | -40 to +75 °C
-40 to +60 °C - ICR-4401W1, ICR-4401W1S |
Storage Temperature | -40 to +85 °C |
Humidity | 0 to 95 % |
IP Cover | IP30 |
Physical Characteristics | |
Dimensions | 47 × 109 × 195 mm |
Enclosure | Robust Metal Case, Grounding Screw |
Mounting | Wall Mounting, DIN Rail (o ptional) |
Weight | 1350 g |
WiFi - optional (ICR-4401W, ICR-4401WS, ICR-4401W1, ICR-4401W1S) | |
Antenna | 3× R-SMA connectors, 3×3 MIMO |
Standards | IEEE802.11 ac/a/b/g/n 2.4 GHz / 5 GHz |
Data Rate | Up to 600 Mbps @ 2.4 GHz Up to 1300 Mbps @ 5 GHz |
Security | WEP, WPA, WPA2, WPA3, 802.1X |
Modes | Access Point (unlimited clients), Station, Multirole STA & AP |
Standards & Regulations | |
Radio | EN 301 893, EN 300 328 |
EMC | EN 301 489-1, EN 301 489-17, EN 610000-6-2, EN 55032, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6 |
Safety | EN 62368-1, IEEE 802.3 |
Transportation | E-mark |
National | CE, UKCA |
Mechanical | EN 60068-2-27, EN 60068-2-64, EN 60529 |
Climatic | EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-30 |
Environmental | RoHS3, Reach, WEEE |
**- Models having ICR-4401W1, ICR-4401W1S order codes have no E8 certification
Software | |
Operating System | ICR-OS (Linux based) |
SW Customization | Router App |
Application Development | Open Linux, *Python, BASH, C/C++, *Node-RED, *Docker |
Networking Features and Protocols | DHCP, NAT/PAT, SSH, VRRP, PPPoE, SNMP, SMTP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, NTP Client/Server, *Routing protocols RIP, BGP, OSPF, IS-IS, NHRP, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack |
Industrial Protocolsand IoT | *Modbus RTU/TCP gateway, *IEC 60870-5-101 to 104 gateway, *DF1, *DNP3, *MQTT, *LWM2M |
Networking Features | DHCP, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, *WOL, NTP Client/Server, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack |
Security |
HTTPS, SSH, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering) VPN Tunneling – WireGuard, OpenVPN, *EasyVPN, IPsec with IKEv1 and IKEv2, GRE, L2TP, PPTP Authentication – RADIUS, TACACS+, 2FA, *SCEP
Encryption – DES, 3DES, AES, RSA, MD5, SHA |
Firmware Management | Automatic firmware updates – server, locally via LAN or remotely via WAN |
Diagnostic/Log |
Status – Data Usage, Detailed Long Term Statistics
One CLICK report – Current Configuration, Factory Identification, Routing Table Log – System Log, Reboot Log, Kernel Log Remote Diagnostics (via SSH) |
Event Engine | StartUp script & Up/Down script (Own rules based on Digital Inputs, Network Parameters, Data Usage, Timer, Power, Device Temperature) Report Types: Email, SNMP Trap |
Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup & Restore configuration |
Advanced Software Tools | WebAccess/DMP – Remote Device Provisioning, Monitoring & Management Platform WebAccess/VPN – Advanced Secure Networking Platform |
*Functionality is available with installed Router App
Accessories
Part Number | Description | Included in the package |
BB-CON-WR2 | 2-pin PWR connector |
ü |
CON-ICR44-14 | 14-pin Serial / IO connector | |
Wall mount kit | ||
BB-DIN-ICR32 | DIN clip (2 pcs are necessary for the mounting) |
Optional |
RPS-ICR4-WR2-M | Wall mount Power supply, 12 V/1.5 A, EU, UK, US, AUS plugs | |
RPS-ICR4-WR2-PSE | **Desktop Power supply POE PSE, 48 V / 1.35 A, (without Power Cord) | |
BB-PWRCORD-AUS | AUS Power Cord (for RPS-ICR4-WR2-PSE) | |
BB-PWRCORD-EU | EU Power Cord (for RPS-ICR4-WR2-PSE) | |
BB-PWRCORD-UK | UK Power Cord (for RPS-ICR4-WR2-PSE) | |
BB-PWRCORD-US | US Power Cord (for RPS-ICR4-WR2-PSE) | |
BB-KD-ETH | Ethernet cross cable, 1.5 m, Shielded | |
OPT1-ANT-WFT-06 | Antenna Wi-Fi, Terminal (3 pcs are recommended for full 3×3 MIMO performance) |
我们网站向用户提供的cookie来增强您的用户体验,个性化内容,并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie,请点击“接受所有cookie”。
或者,点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息,并选择您希望我们使用的cookie类型。