搜索产品
搜索文章
Advantech ICR-4133 is a ICR-4100，EMEA，2×ETH，USB，SD，无配件
如需帮助,请联系我们
免费电话：400-880-8951
公司邮箱：advavee@outlook.com
咨询客服：一站式采购
批量采购定制咨询，请发送您的需求，我们将立即回复。
Order Codes
|
Model no. - Order Codes |
REGION |
2× Gigabit Ethernet |
2× Serial RS232 R485 |
GNSS |
I/O |
1× USB Host 3.0 |
2× SIM |
WiFi 6 |
Bluetooth V5.2 |
|
| ICR-4233 | EMEA* | ü | ü | ü | ü | ü | ü | |||
| ICR-4233W | EMEA* | ü | ü | ü | ü | ü | ü | ü | ü | |
| ICR-4133 | EMEA* | ü | ü | ü | ü | |||||
| ICR-4133W | EMEA* | ü | ü | ü | ü | ü | ü | |||
Specifications
| System | |
| CPU | Quad-Core ARM Cortex-A53, 1.6 GHz |
|
Memory |
RAM - 1GB,
eMMC - 8 GB (2.18 GB for Router Apps, 474 MB for customer data, 231 MB for system data) |
| Watchdog | HW Watchdog |
| RTC | Battery backup RTC |
| TPM | Trusted Platform Module (TPM) 2.0 |
| Interfaces | |
| Ethernet | 2× Ethernet, RJ45, 10/100/1000 Mbps, isolation 1.5 kV |
|
Serial Lines (ICR-4200) |
2× RS232/RS485 independently selectable by DIP switch RS232 (Tx, Rx, GND, RTS, CTS),
RS485 (A(-), B(+), GND), 16-pin terminal block (no isolation) |
| I / O
(ICR-4200) |
4× Digital Input (48 V / 3 mA consumption) 2× Digital Output (Open Drain, 48 V / 500 mA) 16-pin terminal block (no isolation) |
| USB | 1× USB 3.0 Host Connector |
| MicroSD Card | 1× Micro SD Card Slot |
| Reset Button | Reboot / Factory reset |
| LED Indicators | System, 3-level signal strength, Data activity, SIM1/SIM2 status, 3G/4G/LTE-A technology, WiFi, User, ETH |
| GNSS | |
| Antenna | 1× SMA connector, Passive antenna only |
| Systems | GPS, GLONASS, BDS, Galileo |
| Protocol | NMEA |
|
Ac Time-to-First-Fix |
Cold start: 40 s Warm start: 35 s Hot start: 3 s |
| Environmental | |
| Power Supply | 9 – 48 V DC (2-pin terminal block) |
|
Consumption |
Without WiFi:
Idle 4.2 W / Average 5.9 W / Maximum 11.6 W With WiFi: Idle 4.3 W / Average 6.8 W / Maximum 12.2 W |
| Sleep Mode | Yes, ICR-4133(W) 10 mW Yes, ICR-4233(W) 15 mW |
| Operating Temperature | -40 to +75 °C |
| Storage Temperature | -40 to +85 °C |
| Humidity | 0 to 95 % |
| IP Cover | IP30 |
| Physical Characteristics | |
| Dimensions | 43 × 130 × 90 mm |
| Enclosure | Robust Metal Case, Grounding Screw |
| Mounting | Wall Mounting, DIN Rail |
|
Weight |
ICR-4133: 500 g
ICR-4133W: 510 g ICR-4233: 505 g ICR-4233W: 515 g |
| WiFi - optional (ICR-4133W, ICR-4233W) | |
| Antenna | 2× R-SMA connectors, 2×2 MIMO |
| Standards | IEEE802.11 ax/ac/a/b/g/n 2.4 GHz / 5 GHz / 6 GHz |
|
Data Rate |
Up to 450 Mbps @ 2.4 GHz Up to 950 Mbps @ 5 GHz Up to 950 Mbps @ 6 GHz |
| Security | TKIP, AES, WPA, WPA2, WPA3, 802.1X |
| Modes | Access Point (up to 15 clients), Station, Multirole STA & AP |
| Bluetooth - optional (ICR-4133W, ICR-4233W) | |
| Antenna | Shared R-SMA WiFi antenna connector |
| Bluetooth | Bluetooth V5.2 |
| Cellular Interface | |
| SIM Slots | 2× SIM (Mini SIMs – 2FF)
*1× Chip SIM (MFF2) |
| Antennas | 2× SMA connector |
|
LTE-A Parameters |
LTE-FDD Bands: B1/B3/B5/B7/B8/B20/B28/B32 LTE-TDD Bands: B38/B40/B41
Transfer rate: 300 Mbps (DL), 50 Mbps (UL) |
| HSPA+/UMTS Parameters | Supported frequency bands: B1/B3/B5/B8 Transfer rate: 42 Mbps (DL), 5.76 Mbps (UL) |
| Software | |
| Operating System | ICR-OS (Linux based) |
| SW Customization | Router App |
| Application Development | Open Linux, *Python, BASH, C/C++, *Node-RED, *Docker |
| Networking Features and Protocols | DHCP, NAT/PAT, SSH, VRRP, PPPoE, SNMP, SMTP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, NTP Client/Server, *Routing protocols RIP, BGP, OSPF, IS-IS, NHRP, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack |
| Industrial Protocols and IoT | *Modbus RTU/TCP gateway, *IEC 60870-5-101 to 104 gateway, *DF1, *DNP3, *MQTT, *LWM2M |
|
Security |
HTTPS, SSH, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering) VPN Tunneling – WireGuard, OpenVPN, *EasyVPN, IPsec with IKEv1 and IKEv2, GRE, L2TP, PPTP Authentication – RADIUS, TACACS+, 2FA, *SCEP
Encryption – DES, 3DES, AES, RSA, MD5, SHA |
| Firmware Management | Automatic firmware updates – server, locally via LAN or remotely via WAN Over-the-Air cellular module firmware updates |
|
Diagnostic/Log |
Status – Signal Strength, Data Usage, Detailed Long Term Statistics
One CLICK report – Current Configuration, Factory Identification, Routing Table Log – System Log, Reboot Log, Kernel Log Remote Diagnostics (via SSH) |
| Event Engine | StartUp script & Up/Down script (Own rules based on Digital Inputs, Network Parameters, Data Usage, Timer, Power, Device Temperature) Report Types: SMS, email, SNMP Trap |
| Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup & Restore configuration |
| Advanced Software Tools | WebAccess/DMP – Remote Device Provisioning, Monitoring & Management Platform WebAccess/VPN – Advanced Secure Networking Platform |
*Functionality is available with installed Router App
| Standards & Regulations | |
| Radio | EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 303 413, EN 300 328, EN 301 893, EN 303 687 |
| EMC | EN 301 491-1, EN 301 489-17, EN 301 489-19, EN 301 489-52, EN 610000-6-2, EN 610000-6-3, EN 55032, EN 61000-4-2, EN 61000-4-3,
EN 61000-4-4, EN 61000-4-5, EN 61000-4-6 |
| Safety | IEC 62368-1, IEC 62311 |
| Transportation | E-mark |
| National | CE, UKCA |
| Mechanical | EN 60529, EN 60068-2-27, EN 60068-2-64 |
| Climatic | EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-78 |
| Environmental | REACH, RoHS3, WEEE |
| Cellular Module Approvals* | Regulatory: GCF, CE, RCM, UKCA |
*- Approvals are valid for the integrated cellular module inside the router only. Cellular module approvals are not always applicable for the whole router – see “Standards and Regulations” chart for complete router approvals available.
Accessories
| Part Number | Description | Included in the package |
| BB-CON-WR2 | 2-pin PWR connector |
ü |
| CON-ICR28-16 | 16-pin Serial / IO connector | |
| Wall mount kit | ||
| BB-DIN-ICR32 | DIN clip | |
| RPS-ICR4-WR2-M | Wall mount Power supply, 12 V / 1.5 A, EU, UK, US, AUS plugs |
Optional |
| BB-KD-ETH | Ethernet cross cable, 1.5 m, Shielded | |
| OPT1-ANT-WFT-06 | Antenna Wi-Fi, 2.4 GHz / 5 GHz/ 6 GHz (2 pcs are recommended for full 2×2 MIMO performance) | |
| ANT-LTE5G-025 | Antenna 5G/LTE, Terminal (2 pcs are recommended for full cellular performance) | |
| BB-2J6024BA-150 | Antenna LTE 2in1 MIMO, Low profile Screw mount, 2× cable 1.5 m | |
| BB-2J6983MPA-150 | Antenna 2in1 5G/LTE MIMO, Magnetic and Adhesive mount, 2× cable 1.5 m | |
| BB-2J7041BGFAP-300 | Antenna LTE 3in1 MIMO, GPS passive, dome screw mount, 3× cable 3m |
ICR-4133我们网站向用户提供的cookie来增强您的用户体验，个性化内容，并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie，请点击“接受所有cookie”。
或者，点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息，并选择您希望我们使用的cookie类型。
