Order Codes
|
Model no. - Order Codes |
REGION |
5×
Gigabit Ethernet |
4× PoE PSE+ |
SFP cage (up to 10 Gbps) | RS232 RS485 CAN BUS
I/O |
GNSS |
4× ANT |
2× SIM |
WiFi |
Bluetooth 5.0 |
Operating Temperature |
||
| ICR-4461 | GLOBAL* | ü | ü | ü | ü | ü | ü | NONE | -40 to +75 °C | ||||
| ICR-4461S | GLOBAL* | ü | ü | ü | ü | ü | ü | ü | NONE | -40 to +75 °C | |||
| ICR-4461W3 | GLOBAL* | ü | ü | ü | ü | ü | ü | 2×2 MIMO | ü | -40 to +75 °C | |||
| ICR-4461W3S | GLOBAL* | ü | ü | ü | ü | ü | ü | ü | 2×2 MIMO | ü | -40 to +75 °C | ||
| ICR-4461-1ND | GLOBAL* | ü | ü | ü | ü | ü | ü | ü | NONE | -40 to +75 °C | |||
| ICR-4461S-1ND | GLOBAL* | ü | ü | ü | ü | ü | ü | ü | ü | NONE | -40 to +75 °C | ||
| ICR-4461W3-1ND | GLOBAL* | ü | ü | ü | ü | ü | ü | ü | 2×2 MIMO | ü | -40 to +75 °C | ||
| ICR-4461W3S-1ND | GLOBAL* | ü | ü | ü | ü | ü | ü | ü | ü | 2×2 MIMO | ü | -40 to +75 °C | |
Specifications
| System | |
| CPU | Quad-Core ARM Cortex-A72, 1200 MHz |
|
Memory |
RAM - 1024 MB eMMC - 4096 MB
(838 MB for Router Apps, 512 MB for customer data) |
| Watchdog | HW Watchdog |
| RTC | Battery backup RTC |
| TPM | Trusted Platform Module (TPM) 2.0 |
| Interfaces | |
|
Ethernet |
5 × Ethernet (4+1), RJ45, 10/100/1000 Mbps, isolation 1.5 kV
*Optional 4× PoE PSE IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) (PoE use is limited – see the ICR-4461 user manual) |
| SFP Cage | 1 × SFP cage (up to 10 Gbps) |
|
Serial Lines |
1 × RS232 (Tx, Rx, GND, RTS, CTS)
1 × RS485 (A(-), B(+), GND) 1 × CAN (CAN_H, CAN_L) (14-pin terminal block) |
|
I / O |
2 × Digital Input (3 mA consumption)
2 × Digital Output (Open Drain, 48 V / 500 mA) (14-pin terminal block) |
| USB | 1 × USB 2.0 Host Connector |
| MicroSD Card | 1 × Micro SD Card Slot |
| Reset Button | Reboot / Factory reset |
| LED Indicators | System, 3-level signal strength, Data activity, SIM1/SIM2 status, 3G/4G/5G technology, 2× Input, 2× Output, User, ETH |
| GNSS | |
| Antenna | Passive antenna,
GNSS L1 band on the ANT3, L5 on the ANT1 |
| Systems | GPS, GLONASS, BeiDou, Galileo, QZSS, SBAS |
| Protocol | NMEA |
|
Ac Time-to-First-Fix |
Cold start: 27.93 s Warm start: 11.55 s Hot start: 1.09 s |
| Bluetooth - optional
(ICR-4461W3, ICR-4461W3S, ICR-4461W3-ND, ICR-4461W3S-ND) |
|
| Antenna | Shared R-SMA WiFi antenna connector |
| Bluetooth | Bluetooth 5.0 |
| Environmental | |
| Power Supply | 9 – 48 V DC (2-pin terminal block) |
|
Consumption |
Without WiFi
Idle 5.5 W / Average 6.2 W / Max 14 W With WiFi Idle 6.4 W / Average 8.7 W / Max 14.2 W PoE PSE without WiFi Idle 5.6 W / Average 6.5 W / Max 138.6 W PoE PSE with WiFi Idle 6.2 W / Average 8.1 W / Max 142 W |
| Sleep Mode | Yes, 3 mW, 170 mW for PoE PSE |
| Operating Temperature | -40 to +75 °C |
| Storage Temperature | -40 to +85 °C |
| Humidity | 0 to 95 % |
| IP Cover | IP30 |
| Physical Characteristics | |
| Dimensions | 47 × 110 × 195 mm |
| Enclosure | Robust Metal Case, Grounding Screw |
| Mounting | Wall Mounting, DIN Rail (optional) |
|
Weight |
ICR-4461 1330 g
ICR-4461S 1340 g ICR-4461W3 1400 g ICR-4461W3S 1410 g |
| WiFi - optional
(ICR-4461W3, ICR-4461W3S, ICR-4461W3-ND, ICR-4461W3S-ND) |
|
| Antenna | 2 × R-SMA connectors, 2×2 MIMO |
| Standards | IEEE802.11 ac/a/b/g/n 2.4 GHz / 5 GHz |
| Data Rate | Up to 300 Mbps @ 2.4 GHz Up to 867 Mbps @ 5 GHz |
| Security | WEP, WPA, WPA2, WPA3, 802.1X |
| Modes | Access Point (unlimited clients), Station, Multirole STA & AP |
| Cellular Interface | |
| SIM Slots | 2× SIM (Mini SIMs – 2FF)
*1× Chip SIM (MFF2) |
| Antennas | 4× SMA connector |
|
5G NR frequency bands |
5G NSA Bands: n1/n2/n3/n5/n7/n8/n12/n13/n14/n18/n20/n25/n26/n28/n29/n30/n38/n40/n41/n48/n66/n70/n71/n75/n76/n77/n78/n79 Transfer rate: 3.4 Gbps (DL), 550 Mbps (UL)
5G SA Bands: n1/n2/n3/n5/n7/n8/n12/n13/n14/n18/n20/n25/n26/n28/n29/n30/n38/n40/n41/n48/n66/n70/n71/n75/n76/n77/n78/n79 Transfer rate: 2.4 Gbps (DL), 900 Mbps (UL) |
|
LTE Parameters |
LTE-FDD Bands: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/B25/B26/B28/B29/B30/B32/B66/B71 LTE-TDD Bands: B34/B38/B39/B40/B41/B42/B43/B48
LTE LAA: B46 Transfer rate: 1.6 Gbps (DL), 200 Mbps (UL) |
| HSPA+/UMTS Parameters | Supported frequency bands: B1/B2/B3/B4/B5/B6/B8/B19 Transfer rate: 42 Mbps (DL), 5.76 Mbps (UL) |
| Software | |
| Operating System | ICR-OS (Linux based) |
| SW Customization | Router App |
| Application Development | Linux based router SDK, *Python, BASH, C/C++, *Node-RED, *Docker |
| Networking Features and Protocols | Static Routes, DHCP, NAT/PAT, SSH, VRRP, PPPoE, SNMP, SMTP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, NTP Client/Server,
*Routing protocols RIP, BGP, OSPF, IS-IS, NHRP, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack |
| Industrial Protocols and IoT | *Modbus RTU/TCP gateway, *IEC 60870-5-101 to 104 gateway, *DF1, *DNP3, *MQTT, *LWM2M |
|
Security |
HTTPS, SSH, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering) VPN Tunneling – WireGuard, OpenVPN, *EasyVPN, IPsec with IKEv1 and IKEv2, GRE, L2TP, PPTP Authentication – RADIUS, TACACS+, 2FA, *SCEP
Encryption – DES, 3DES, AES, RSA, MD5, SHA |
| Firmware Management | Automatic firmware updates – server, locally via LAN or remotely via WAN Over-the-Air cellular module firmware updates |
|
Diagnostic/Log |
Status – Signal Strength, Data Usage, Detailed Long Term Statistics
One CLICK report – Current Configuration, Factory Identification, Routing Table Log – System Log, Reboot Log, Kernel Log Remote Diagnostics (via SSH) |
| Event Engine | StartUp script & Up/Down script (Own rules based on Digital Inputs, Network Parameters, Data Usage, Timer, Power, Device Temperature) Report Types: SMS, email, SNMP Trap |
| Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup & Restore configuration, Multi-user (add/remove/manage users) |
| Advanced Software Tools | WebAccess/DMP – Remote Device Provisioning, Monitoring & Management Platform WebAccess/VPN – Advanced Secure Networking Platform |
*Functionality is available with installed Router App
| Standards & Regulations | |
| Radio | EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 301 908-25, EN 303 413, EN 300 328, EN 301 893
FCC part 22H, FCC part 24E, FCC part 27, FCC part 90, FCC part 96, PTCRB |
| EMC | EN 301 491-1, EN 301 489-17, EN 301 489-19, EN 301 489-52, EN 610000-6-2, EN 610000-6-3, EN 55032, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, FCC part 15.B, FCC part 15C, FCC part 15E |
| Safety | IEC 62368-1 |
| Transportation | E-mark |
| National | CE, UKCA, FCC, IC |
| Carrier Approval | FirstNet, AT&T, Verizon PROJECT BASED T-Mobile PROJECT BASED |
| Mechanical | EN 60068-2-27, EN 60068-2-64, EN 60068-2-64, MIL-STD-810G, SAE J1455 |
| Climatic | EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-78, MIL-STD-810G, SAE J1455 |
| Environmental | REACH, RoHS3, WEEE |
| Cellular Module Approvals* | Regulatory: GCF, FCC, IC, PTCRB
Carrier: Verizon, AT&T (FirstNet), T-Mobile, U.S. Cellular, Rogers, Telus |
*- Approvals are valid for the integrated cellular module inside the router only. Cellular module approvals are not always applicable for the whole router – see “Standards and Regulations” chart for complete router approvals available.
Accessories
| Part Number | Description | Included in the package |
| BB-CON-WR2 | 2-pin PWR connector |
ü |
| CON-ICR44-14 | 14-pin Serial / IO connector | |
| Wall mount kit | ||
| BB-DIN-ICR32 | DIN clip (2 pcs are necessary for the mounting) |
Optional |
| RPS-ICR4-WR2-M | Wall mount Power supply, 12 V/1.5 A, EU, UK, US, AUS plugs | |
| RPS-ICR4-WR2-PSE | **Desktop Power supply POE PSE, 48 V / 1.35 A (65W), (without Power Cord) | |
| BB-PWRCORD-AUS | AUS Power Cord (for RPS-ICR4-WR2-PSE) | |
| BB-PWRCORD-EU | EU Power Cord (for RPS-ICR4-WR2-PSE) | |
| BB-PWRCORD-UK | UK Power Cord (for RPS-ICR4-WR2-PSE) | |
| BB-PWRCORD-US | US Power Cord (for RPS-ICR4-WR2-PSE) | |
| BB-KD-ETH | Ethernet cross cable, 1.5 m, Shielded | |
| OPT1-ANT-WFT-06 | Antenna Wi-Fi, 2.4 & 5.8 GHz (2 pcs are recommended for full 2 × 2 MIMO performance) | |
| ANT-LTE5G-025 | Antenna 5G/LTE, Terminal (4 pcs are recommended for full cellular 5G performance) | |
| BB-2J7B83BC-150 | Antenna 4in1 5G / LTE MIMO, GNSS, Screw mount, 4 × cable 1.5 m | |
| OPT1-ANT-5GSDWG-15 | Antenna 6in1 5G / LTE MIMO, WiFi 6 MIMO, GNSS, screw mount, 6 × cable 1.5m |
我们网站向用户提供的cookie来增强您的用户体验,个性化内容,并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie,请点击“接受所有cookie”。
或者,点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息,并选择您希望我们使用的cookie类型。