Order Codes
Model no. - Order Codes |
Region |
FirstNet Certification |
2× Ethernet |
RS232 RS485 |
GNSS |
I/O |
LTE ANT + DIV |
2× SIM |
WiFi 802.11ac | Bluetooth v5.1
(class1) |
|
ICR-3241 | NAM* | ü | ü | ü | ü | ü | |||||
ICR-3241W | NAM* | ü | ü | ü | ü | ü | ü | ü | ü | ||
ICR-3241-1ND | NAM* | ü | ü | ü | ü | ü | ü | ||||
ICR-3241W-1ND | NAM* | ü | ü | ü | ü | ü | ü | ü | ü | ü |
Specifications
System | |
CPU | Cortex-A8, 1000 MHz |
Memory |
RAM – 512 MB eMMC – 4096 MB
(838 MB for Router Apps, 512 MB for customer data) |
Watchdog | HW Watchdog |
RTC | Battery backup RTC |
Interfaces | |
Ethernet | 2× Ethernet, RJ45, 10/100 Mbps, Isolation 1.5 kV |
Serial Lines |
1× RS232 (Tx, Rx, RTS, CTS, GND)
1× RS485 (A(-), B(+), GND) (10-pin terminal block) |
I / O |
1× Digital Input
1× Digital Output (10-pin terminal block) |
Reset Button | Reboot / Factory reset |
LED Indicators | System, 3-level signal strength, Data activity, SIM1/SIM2 status, 2G/3G/4G technology, User, ETH |
Bluetooth - optional | |
Antenna | Shared R-SMA WiFi antenna connector |
Version | Bluetooth 5.1, class 1 (Bluetooth Low Energy), Bluetooth®SIG Qualification |
Data rate | 1 Mbps (GFSK), 2 Mbps (p/4-DQPSK), 3 Mbps (8-DPSK) |
Environmental | |
Power Supply | 9 – 36 V DC (2-pin terminal block) |
Consumption | With WiFi: Idle 2.5 W / Average 4 W / Maximum 11 W HW Rev 1.0
With WiFi: Idle 2.6 W / Average 4.3 W / Maximum 5.8 W HW Rev 2.0 |
Sleep Mode | Yes, 100 mW HW Rev 1.0 , 20 mW HW Rev 2.0 |
Operating Temperature | -40 to +75 °C |
Storage Temperature | -40 to +85 °C |
Humidity | 5 to 95 % |
IP Cover | IP30 |
Physical Characteristics | |
Dimensions | 31.2 × 94 × 129 mm |
Enclosure | Metal Case, Grounding Screw |
Mounting | Wall Mount kit, DIN Rail |
Weight | ICR-3241 - 457g ICR-3241W - 477g |
WiFi - optional | |
Antenna | 2× R-SMA connectors, 2×2 MIMO |
Standards | IEEE802.11 ac/a/b/g/n 2.4 GHz / 5 GHz |
Security | WEP, WPA, WPA2, WPA3, 802.1X |
Modes | Access Point (unlimited clients), Station, Multirole STA & AP |
GNSS - optional | |
Antenna | Active, 1× SMA connector |
Systems | GPS, GLONASS, BeiDou, Galileo, QZSS |
Protocol | NMEA |
Ac Time-to-First-Fix | Cold 35 s, Warm 26 s |
Standards & Regulations | |
Radio | FCC part 22H, FCC part 24E, FCC part 27, PTCRB |
EMC | EN 61000-6-2, FCC part 15.B, ICES-003 Issue 6 |
Safety | UL/EN/AS/NZS 62368-1 |
Mechanical | EN 60068-2-27, EN 60068-2-64, MIL-STD-810G, SAE J1455 |
Climatic | EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-78, MIL-STD-810G, SAE J1455 |
Transportation | E-Mark, EN 45545-2 |
Railway | EN 50155 compliant |
Carrier Approval | Verizon, AT&T, FirstNet, T-Mobile |
National | FCC, IC |
Environmental | REACH, RoHS3 and WEEE compliant |
Cellular Module Approvals* | Regulatory: GCF, FCC, PTCRB, IC
Carrier: Verizon, AT&T, FirstNet, T-Mobile, U.S. Cellular, Rogers, Telus |
Software | |
Operating System | ICR-OS (Linux based) |
SW Customization | Router App |
Application Development | Open Linux, *Python, BASH, C/C++, *Node-RED, *Docker |
Networking Features and Protocols | DHCP, NAT/PAT, SSH, VRRP, PPPoE, SNMP, SMTP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, NTP Client/Server, *Routing protocols RIP, BGP, OSPF, IS-IS, NHRP, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack |
Industrial Protocols and IoT | *Modbus RTU/TCP gateway, *IEC 60870-5-101 to 104 gateway, *DF1, *DNP3, *MQTT, *LWM2M |
Security |
HTTPS, SSH, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering) VPN Tunneling – WireGuard, OpenVPN, *EasyVPN, IPsec with IKEv1 and IKEv2, GRE, L2TP, PPTP Authentication – RADIUS, TACACS+, *SCEP
Encryption – DES, 3DES, AES, RSA, MD5, SHA |
Firmware Management | Automatic firmware updates – server, locally via LAN or remotely via WAN Over-the-Air cellular module firmware updates |
Diagnostic/Log |
Status – Signal Strength, Data Usage, Detailed Long Term Statistics
One CLICK report – Current Configuration, Factory Identification, Routing Table Log – System Log, Reboot Log, Kernel Log Remote Diagnostics (via SSH) |
Event Engine | StartUp script & Up/Down script (Own rules based on Digital Inputs, Network Parameters, Data Usage, Timer, Power, Device Temperature) Report Types: SMS, email, SNMP Trap |
Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup & Restore configuration |
Advanced Software Tools | WebAccess/DMP – Remote Device Provisioning, Monitoring & Management Platform WebAccess/VPN – Advanced Secure Networking Platform |
*Functionality is available with installed Router App
Cellular Interface | |
SIM Slots | 2× SIM (Mini SIM – 2FF) with cover, *1× Chip SIM (MFF2) |
Antennas | 2× SMA connector (1× Main, 1× Diversity) |
LTE Parameters |
Cat.4, 3GPP E-UTRA Release 11
Supported FDD frequencies: B2 (1900 MHz), B4 (1700 MHz), B5 (850 MHz), B12, B13, B14 (700 MHz), B66 (1700 MHz), B71 (600 MHz) Transfer rate: 150 Mbps (DL), 50 Mbps (UL) |
HSPA+/UMTS Parameters | Supported frequencies: B2 (1900 MHz), B4 (1700 MHz), B5 (850 MHz) Transfer rate: 4.2 Mbps (DL) / 2.2 Mbps (UL) |
*Project-based customization
Accessories
Included in the package | Optional | ||
Part Number | Description | ||
Wall mount kit | ü | ||
BB-DIN-ICR32 | DIN clip | ü | |
BB-CON-ICR32-10 | Serial / IO connector | ü | |
BB-CON-WR2 | PWR connector | ü | |
ANT-LTE5G-025 | Antenna 5G/LTE Terminal | ü | |
OPT1-ANT-WFT-06 | Antenna WiFi, Terminal | ü | |
OPT1-ANT-GNS-20 | Antenna GNSS, Magnetic mount | ü | |
BB-RPS-v2-WR2-EU | Wall mount Power Supply 12V/1A, EU plug | ü | |
BB-RPS-v2-WR2-UK | Wall mount Power Supply 12V/1A, UK plug | ü | |
BB-RPS-v2-WR2-US | Wall mount Power Supply 12V/1A, US plug | ü | |
BB-RPS-v2-WR2-AUS | Wall mount Power Supply 12V/1A, AUS plug | ü |
我们网站向用户提供的cookie来增强您的用户体验,个性化内容,并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie,请点击“接受所有cookie”。
或者,点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息,并选择您希望我们使用的cookie类型。