Specifications
System | |
CPU | ARM926EJ-S, 600 MHz |
Memory |
RAM - 128 MB eMMC - 4096 MB
(838 MB for Router Apps, 512 MB for customer data) |
Watchdog | HW Watchdog |
RTC | Battery backup RTC |
TPM* | Trusted Platform Module (TPM) 2.0 |
Supercap* | Last-gasp Supercapacitor |
Interfaces | |
Ethernet | 2× Ethernet, RJ45, 10/100 Mbps, Isolation 1.5 kV |
Serial Lines |
2× RS232/RS485 independently selectable by DIP switch RS232 (Tx, Rx, GND, RTS, CTS),
RS485 (A(-), B(+), GND), 16-pin terminal block (no isolation) |
I / O |
4× Digital Input (48 V / 3 mA consumption) 2× Digital Output (Open Drain, 48 V / 500 mA) 16-pin terminal block (no isolation) |
USB | 1× USB 2.0 Host Connector |
Reset Button | Reboot / Factory reset |
LED Indicators | System, Signal strength, Data activity, SIM1, SIM2, 2G/3G/4G technology, User, ETH |
* Project based customization
Environmental | |
Power Supply | 9 – 48 V DC (2-pin terminal block) |
Consuption | Idle 1.9 W / Average 3.5 W / Maximum 7.4 W |
Sleep Mode | Yes, 6 mW |
Operating Temperature | -40 to +75 °C |
Storage Temperature | -40 to +85 °C |
Humidity | 5 to 95 % |
IP Cover | IP30 |
Physical Characteristics | |
Dimensions | Metal Case: 42 × 80.3 × 113.2 mm
Plastic Case: 51.4 × 83.8 × 117 mm |
Enclosure | Metal Case with grounding screw or Plastic Case |
Mounting | DIN-Rail |
Weight | Metal Case: 300 g Plastic Case: 240 g |
GNSS - ICR-2834Gxxx | |
Antenna | 1× SMA connector, active (50 mA) |
Systems | GPS, GLONASS, BeiDou, Galileo |
Protocol | NMEA 0183 |
Ac Time-to-First-Fix | Warm start: 28 s, Cold 32 s |
WiFi - ICR-2834Wxxxx | |
Antenna | 1× R-SMA connector |
Standards | IEEE802.11 ac/a/b/g/n 2.4 GHz / 5 GHz |
Security | WEP, TKIP, AES, WPA, WPA2, WPA3, 802.1X |
Modes | Access Point (up to 8 clients), Station, Multirole STA & AP |
Cellular Interface | |
SIM Slots | 2× SIM (Mini SIM – 2FF) with cover, *1× Chip SIM (MFF2) |
Antennas | 2× SMA connector (1× Main, 1× Diversity) |
LTE Parameters | Supported FDD frequencies: B1 (2100 MHz), B3 (1800 MHz), B5 (850 MHz), B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz), B28 (700 MHz)
Transfer rate: 150 Mbps (DL), 50 Mbps (UL) |
HSPA+/UMTS Parameters | Supported frequencies: B1 (2100 MHz), B3 (1800 MHz), B8 (900 MHz) Transfer rate: 14.4 Mbps (DL), 5.76 Mbps (UL) |
EDGE/GPRS Parameters | Supported frequencies: B2 (1900 MHz), B3 (1800 MHz), B5 (850 MHz), B8 (900 MHz) Transfer rate: 237 kbps (DL), 237 kbps (UL) |
* Project based customization
Software | |
Operating System | ICR-OS (Linux based) |
SW Customization | Router App |
Application Development | Open Linux, *Python, BASH, C/C++ |
Industrial Protocols and IoT | *Modbus RTU/TCP gateway, *IEC 60870-5-101 to 104 gateway, *DF1, *DNP3, *MQTT, *LWM2M |
Networking Features and Protocols | DHCP, NAT/PAT, SSH, VRRP, PPPoE, SNMP, SMTP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, NTP Client/Server, *Routing protocols RIP, BGP, OSPF, IS-IS, NHRP, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack |
Security |
HTTPS, SSH, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering) VPN Tunneling – WireGuard, OpenVPN, *EasyVPN, IPsec with IKEv1 and IKEv2, GRE, L2TP, PPTP Authentication – RADIUS, TACACS+, 2FA, *SCEP
Encryption – DES, 3DES, AES, RSA, MD5, SHA |
Firmware Management | Automatic firmware updates – server, locally via LAN or remotely via WAN Over-the-Air cellular module firmware updates |
Diagnostic/Log |
Status – Signal Strength, Data Usage
One CLICK report – Current Configuration, Factory Identification, Routing Table Log – System Log, Reboot Log, Kernel Log Remote Diagnostics (via SSH) |
Event Engine | StartUp script & Up/Down script (Own rules based on Digital Inputs, Network Parameters, Data Usage, Timer, Power, Device Temperature) Report Types: SMS, *email, *SNMP Trap |
Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup & Restore configuration |
Advanced Software Tools | WebAccess/DMP – Remote Device Provisioning, Monitoring & Management Platform WebAccess/VPN – Advanced Secure Networking Platform |
*Functionality is available with installed Router App
Standards & Regulations | |
Radio | EN 301 511, EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 303 413, EN 301 893, EN 300 328 |
EMC | EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 301 489-52, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11,
IEC 61000-6-2, IEC 61000-6-3, EN 55032 |
Safety | EN 62368-1, IEEE 802.3 |
Transportation | E8 |
National | CE, UKCA |
Mechanical | EN 60529, EN 60068-2-27, EN 60068-2-64 |
Climatic | EN 60068-2-1, EN 60068-2-2, EN 60068-2-14, EN 60068-2-30 |
Environmental | REACH, RoHS3, WEEE |
Accessories
Included in the package | Sold Separately | |||||||
Part Number | Description | ICR-2834
ICR-2834W |
ICR-2834P
ICR-2834WP |
ICR-2834A01
ICR-2834WA01 |
ICR-2834PA01
ICR-2834WPA01 |
ICR-2834A02
ICR-2834WA02 |
ICR-2834PA02
ICR-2834WPA02 |
|
BB-CON-WR2 | 2-pin PWR connector | ü | ü | ü | ü | ü | ü | ü |
CON-ICR28-16 | 16-pin Serial / IO connector | ü | ü | ü | ü | ü | ü | ü |
BB-SBD40 | DIN clip | ü | ü | ü | ü | |||
BB-SBD40P | DIN clip | ü | ü | ü | ü | |||
BB-KD-ETH | Ethernet cross cable | ü | ü | ü | ü | ü | ||
BB-RPS-v2-WR2-EU | Wall mount Power supply, 12V/1A, EU plug | ü | ü | ü | ||||
BB-RPS-v2-WR2-UK | Wall mount Power supply, 12V/1A, UK plug | ü | ü | ü | ||||
BB-RPS-v2-WR2-US | Wall mount Power supply, 12V/1A, US plug | ü | ||||||
ANT-LTE5G-025 | Antenna 5G/LTE, Terminal | ü 2 pcs | ü 2 pcs | ü 2 pcs | ü 2 pcs | ü | ||
OPT1-ANT-WFT-06 | Antenna Wi-Fi, Terminal | ICR-2834WA01 | ICR-2834WPA01 | ICR-2834WA02 | ICR-2834WPA02 | ü |
我们网站向用户提供的cookie来增强您的用户体验,个性化内容,并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie,请点击“接受所有cookie”。
或者,点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息,并选择您希望我们使用的cookie类型。