Specifications
System | |
CPU | ARM926EJ-S, 600 MHz |
Memory |
RAM - 128 MB
NOR Flash - 64 MB (12 MB for Router Apps, 2 MB for customer data) |
Watchdog | HW Watchdog |
RTC | Battery backup RTC |
Interfaces | |
Ethernet | 4× Ethernet (3+1), RJ45, 10/100 Mbps, 1.5 kV |
Serial Lines |
1× RS232 (Tx, Rx, GND, RTS, CTS)
1× RS485 (A(-), B(+), GND) (7-pin terminal block) |
I / O |
1× Digital Input (48 V / 0.5 mA)
1× Digital Output (Open Drain, 48 V / 100 mA) (6-pin terminal block together with PWR) |
Reset Button | Reboot / Factory reset |
LED Indicators | System, Signal strength, Data activity, SIM1/SIM2 status, 2G/3G/4G technology, Input, Output, User, ETH |
Environmental | |
Power Supply | 9 – 48 V DC (6-pin terminal block together with I/O) |
Consuption | ICR-2631: Idle 2.6 W / Average 3.5 W / Maximum 5 W ICR-2631W: Idle 2.9 W / Average 4.1 W / Maximum 5.9 W |
Operating Temperature | -40 to +75 °C |
Storage Temperature | -40 to +85 °C |
Humidity | 5 to 95 %, non-condensing |
IP Cover | IP30 |
Physical Characteristics | |
Dimensions | 130 mm × 95 mm × 25 mm |
Enclosure | Metal Case, Grounding Screw |
Mounting | Wall mount, * Optional DIN Rail mount |
Weight | 380 g |
WiFi - ICR-2631W | |
Antenna | 1× R-SMA connector |
Standards | IEEE802.11 ac/a/b/g/n 2.4 GHz / 5 GHz |
Security | WEP, TKIP, AES, WPA, WPA2, WPA3, 802.1X |
Modes | Access Point (up to 8 clients), Station, Multirole STA & AP |
Cellular Interface | |
SIM Slots | 2× SIM (Micro SIM – 3FF) |
Antennas | 2× SMA connector (1× ANT, 1× DIV) |
LTE Parameters |
Supported FDD frequencies: B1 (2100 MHz), B3 (1800 MHz),
B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz), B28A (700 MHz) Supported TDD frequencies: B38 (2600 MHz), B40 (2300 MHz), B41 (2500 MHz) Transfer rate: 150 Mbps (DL), 50 Mbps (UL) |
HSPA+/UMTS Parameters | Supported frequencies: B1 (2100 MHz), B8 (900 MHz) Transfer rate: 42 Mbps (DL), 5.76 Mbps (UL) |
EDGE/GPRS Parameters | Supported frequencies: B3 (1800 MHz), B8 (900 MHz) Transfer rate: 296 kbps (DL), 236.8 kbps (UL) |
Standards & Regulations | |
Radio | EN 301 511, EN 301 908-1, EN 301 908-2, EN 301 908-13,
EN 301 893, EN 300 328 |
EMC |
EETSI EN 301 489-1, ETSI EN 301 489-17,
ETSI EN 301 489-52, IEC 61000-6-2, IEC 61000-6-3, EN 61000-4-2, EN IEC 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 55032 |
Safety | EN 62 368-1, IEEE 802.3 |
Transportation | E-mark |
National | CE, UKCA |
Mechanical | EN 60529 |
Climatic | EN 60068-2-1, EN 60068-2-2, EN 60068-2-14, EN
60068-2-30 |
Environmental | REACH, RoHS3, WEEE |
Cellular Module Approvals* | Regulatory: GCF, CE, UKCA, NCC, RCM Carrier: Vodafone Global, Deutsche Telekom |
Accessories
Part Number | Description | Included in the package |
CON-ICR2-6-PWR | 6-pin PWR / IO connector | ü |
CON-ICR2-7-SER | 7-pin Serial RS232, RS485 connector | ü |
Wall mount kit | ü | |
BB-DIN-ICR32 | DIN Clip | |
BB-KD-ETH | Ethernet cross cable, lenght 1.5m | |
ANT-LTE5G-025 | Antenna 5G/LTE, Terminal, SMA-M | |
OPT1-ANT-WFT-06 | Antenna Wi-Fi, Terminal | |
RPS-ICR2-EU | Power Supply, ICR2, 12V/1A, 6-pin, EU plug | |
RPS-ICR2-UK | Power Supply, ICR2, 12V/1A, 6-pin, UK plug | |
ACC-KIT-ICR2-001 | ICR-2000 family accessory kit, 2× LTE ANT, EU Power Supply, ETH cable |
Software | |
Operating System | ICR-OS (Linux based) |
SW Customization | Router App |
Application Development | Open Linux, *Python, BASH, C/C++ |
Industrial Protocols and IoT | *DF1, *DNP3, *MQTT, *LWM2M |
Networking Features and Protocols | DHCP, NAT/PAT, SSH, VRRP, PPPoE, SNMP, SMTP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, NTP Client/Server, *Routing protocols RIP, BGP, OSPF, IS-IS, NHRP, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack |
Security |
HTTPS, SSH, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering) VPN Tunneling – WireGuard, OpenVPN, *EasyVPN, IPsec with IKEv1 and IKEv2, GRE, L2TP, PPTP Authentication – RADIUS, TACACS+, 2FA, *SCEP
Encryption – DES, 3DES, AES, RSA, MD5, SHA |
Firmware Management | Automatic firmware updates – server, locally via LAN or remotely via WAN |
Diagnostic/Log |
Status – Signal Strength, Data Usage
One CLICK report – Current Configuration, Factory Identification, Routing Table Log – System Log, Reboot Log, Kernel Log Remote Diagnostics (via SSH) |
Event Engine | StartUp script & Up/Down script (Own rules based on Digital Inputs, Network Parameters, Data Usage, Timer) Report Types: SMS, email, SNMP Trap |
Configuration | Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup & Restore configuration |
Advanced Software Tools | WebAccess/DMP – Remote Device Provisioning, Monitoring & Management Platform WebAccess/VPN – Advanced Secure Networking Platform |
*Functionality is available with installed Router App
我们网站向用户提供的cookie来增强您的用户体验,个性化内容,并向您展示有关我们优质产品的更多相关内容。
如果您同意我们使用cookie,请点击“接受所有cookie”。
或者,点击“管理cookie”以了解更多关于我们的隐私和cookie通知的信息,并选择您希望我们使用的cookie类型。